Windows 10: Cannot boot from USB Windows 10 UEFI

I'm having difficulty booting from a USB flash drive. Although the USB drive appears in the boot menu, when clicked the screen goes blank, then sends me back to the boot menu within seconds.


I have tried using several different USB creation utilities, including Rufus. This occurs regardless of whatever I'm booting.


My system:

Win10x64 Pro

i7-8700

64 GB RAM

UEFI Boot

All GPT disks

USB 3.0


SanDisk Ultra 64GB flash drive

:)

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

Install Windows 10 using UEFI bootable USB thumb drive

You need to go into you system bios and select allow uefi usb drive. Then add the UEFI usb drive to the boot menu

better way to partition aand create an bootable usb.

For the UEFI system, we can use these steps to create the bootable USB:

1.Locate a 4GB or larger USB flash drive

2.Open Diskpart and run the following command cmd admin type diskpart

• Type DiskPart in the command prompt.
• Type "List Disk” (make note of the disk number of the target USB drive).
• Type "Select Disk X”, where X is the target USB drive noted in step 4.
• Type "Clean”.
• Type "Create Partition Primary”.
• Type "format FS=fat32 quick”.
• Type "Active”.
• Type "Assign".
• Type "Exit".

Copy your ISO files to the drive and reboot

never use UEFI it better to repartition and remove UEFI go with legacy bois

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.