Windows 10: Cannot Connect To A Network Storage Drive On My Home Network

The problem is the PC has an iTunes library on it and we had to store it on the C:\ Drive in a public folder. The C:\ drive (256 GB) does not have much space left due to the size of the iTunes library. The storage drive is a 2 TB. I can access other storage drives on my network. I want to avoid replacing the C:\ drive and use the storage drive for the iTunes. library. The message is: "Network Error. Windows cannot access \\Audra-pc/e. You do not have permission to access \\Audra-pc\e. Contact your network administrator to request access." Followed by a help link.

:)

 

Losing network connection

Hello Dear, if you have a laptop or a PC with a wireless network adapter, you can see a list of available wireless networks and then connect to one of those networks. The wireless networks will only appear if your PC has a wireless network adapter installed, the adapter is turned on, and the wireless access point is in range.

1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.

2. In the left pane, under Network Tasks, click View available wireless networks.
In case, If you don't see the network you want to connect to, click Refresh network list. If you see the network but the signal is weak, move the PC closer to the wireless router.

3. Click the network you want to connect to, and then click Connect.

4. If you're connecting to a secure network, type the security key, and then click OK.

I Hope you solve out your query soon.

 

Help needed with simple wired network

Step one- Connect all PC's to router, and then the router to the modem. PC's go to router by the ports labeled "1-4" on the back of the router. WAN port goes to router. Power up all network equipment, and then systems.
Step two- Power on the computer connected to port one. Go into router settings at 192.168.0.1 and configure internet, dyndns, firewall, etc.
Step three- Go to "network set up wizard" in windows. (Network places- network set up wizard). The rest is self explanatory.
Step four- right click on each drive and printer you want to share, and then configure sharing preferences. Should be easy enough.
Step five- right click my computer, and the select "map network drive". Using the network address for each piece of hardware you shared, assign network drive letters.

Congratulations, you have a fully operational network. Happy Gaming! *Toast :toast:

 

Help needed with simple wired network

Perfecto!!!! *Smile