Windows 10: Cannot connect to wifi after upgrade to Windows 10

I had always expected a few glitches after doing an in-place upgrade from Win7 to Win10 (v21H1) on my Samsung RF511 laptop (which is a few years old but in theory capable of handling Win10). After sluggish boot-up and touchpad issues (raised in separate posts), this one is about wifi connection. The problem is simple. No wifi. Ethernet (which uses a Realtek adapter) works fine, so my internet connection as such is good. When trying to make a wireless connection, the laptop running Win 10 "sees" the wifi link. The router is a Netgear, again not the latest model. It has WPA password-key protection. But running Win10 now, the laptop "can't connect". The laptop has a Broadcom 802.11n network adapter. With Win7 before the upgrade, the wifi connection worked fine. When dual-booted into Linux Mint on the same machine, the wifi connection still works fine. This suggests that both the Netgear router and the Broadcom adapter hardware are operating properly. The only thing that has changed is the upgrade to Win 10. I have run the Win10 wifi troubleshooter. I've done the standard steps it asks (switch the router off and on again...). It says there is a problem.... but offers no suggestions for how to solve it. I have looked at the network adapter properties/drivers. The driver is v.5.100.82.95 which appears to date from 2011. It is said to be working properly. Windows Updates offers no more recent version, and trying 'update driver' in Device Manager brings the message that the installed driver is the right or best one. The Broadcom support website is hopeless, but I did find, download and install a more recent driver - v.7.5.340.0 dated 2015. No solution - the wifi still will not connect. A laptop that can only connect via ethernet hard-wiring is not very useful. So what else can I try in order to get a wifi connection?

:)

 

Installing Windows 10 on Lumia 920

I have a Lumia 920 mobile phone.
Found a list on the net with compatible phones that support Win 10. Mine is on that list.
Can't upgrade with the usual way.
Found help on this official website of developers for Windows Phones. It's a step by step no brainer thing. Most people are doing it. Except me. I can't get past point 6. HOWTO: Install Windows 10 for Phones on Non-supported devices (and other hacks)

"6.Connect to the same WiFi that your PC is on. Edit the settings for the WiFi connection to turn on the Proxy and set it to use the PC’s IP address and enter 8877 for the port "

7. Open Internet Explorer on your phone and navigate to http://[pc.ip.add.ress]:8877 where [pc.ip.add.ress] is the IP address of the PC running the WPInsidersHacks app
No idea what this means.I guess i need to access the router and modify some settings in there. Some guy on the forum told me " think he means to use the local IP address of the pc. Go to cmd and type ipconfig and look for ipv4 address. Should be somethin like 192/......"

I did connect my phone as always via wi-fi to my router. But i have no ideea how to use that proxy or how to make my phone have the same Ip as computer. I did start WPInsiderHacks app on pc. This is what it looks like




Theres also this official Windows Phones
It says this :
1. Download the Windows Insider app.
Press ... > about > make sure Sys free space is 300MB or more.
If there isn't enough space, make full reset with Windows Phone Recovery Tool.

Code:
upwp10.chinacloudapp.cn:7777

Download and install certificate.
3. Edit WiFi connection, enable Proxy

Code:
upwp10.chinacloudapp.cn
7777

4. Open Insider app, click get builds
5. You will get Enroll page, do not Enroll yet!
6. Switch to WIFI settings, turn off proxy.
7. Switch to Windows Insider app and now you can enroll for Windows 10 Technical Preview.
Choose Fast option.
8. Check Settings > Phone update.
If it can't find updates, you may need to reboot your phone and enroll again (without a proxy now).

Same thing with the proxy. Anyways the more detailed steps on the DEV forum are much better i think .Cuz they put out more info on how to do it.

Can anybody help me with step 6 ?

 

Windows 10 upgrade problem, no input accepted

I really hate having to come here and ask for help, but I really am stumped. It hurts my geek pride. I have a PC with fairly modern hardware in it. It has a p8p67 pro in it. I have tried upgrading windows 10 on it twice now. Both times I have had the same result.

After windows finishes upgrading it goes to the log in/set up screen. I can't do anything. No keyboard or mouse input is accepted.

I will list some, or hopefully all, of the troubleshooting steps I have tried:

• Move keyboard and mouse to different USB ports.
• Try different keyboard or mouse.
• Restart computer, repeatedly.
• Google for related issues.
• Update Bios, because why not.
• Create boot media and revert to windows 7.

The windows 10 system restore boot media works fine with keyboard and mouse. All USB ports work in windows 7. I don't know what is wrong. I suspect that windows 10 is lacking a driver of some sort, but since the computer accepts no input I have no way of checking for which driver let alone installing it.

Please help me figure this out. If I have to revert back to windows 7 again, I am not going to get it upgraded to windows 10. Thank you in advanced.

 

When will the wifi connectivity problems be solved?


OK, so the Windows 10 engineers bollixed up the wifi connectivity part of the operating system. Everybody knows that by now. It seems they are making some progress in resolving it. Now, instead of seeing "Secured, No Internet" on your list of wifi connections, you see "Connected, Secured" EXCEPT no webpages will load. So you really aren't connected. It does seem to be a step in the right direction. Does anybody know when they plan on a full and complete repair of this screw up of epic proportions?