Windows 10: Cannot rebuild BCD files.

I restarted my PC after messing with ASUS files on my computer, ASUS is mb manufacturer and I'm getting a blue screen with the error code 0xc0000225. I've searched the internet for fixes and none of them have worked yet. The most promising solution, repairing my BCD files, doesn't seem to work. In cmd prompt, when I type - bootrec /rebuildbcd - I get this:Successfully scanned Windows installations.Total identified Windows installations: 1[1] D:\WindowsAdd installation to boot list? YesY/NoN/AllA :yWhen I respond with Y, N, or A, I get this:The requested system device cannot be identifi

:)

 

How to clean up BCD entries? Rebuild the BCD?

This is normal that under Recovery Environment, The letters are re-assigned. This is why you have to be careful and select the correct one.
@dictum
Advice: Never use Easy BCD with Windows installed using GPT disk. Use Easy UEFI instead provided you know what you are doing. Easy BCD only works with MBR disk type.
Base on the screen shot above. Your disk 0 is your new Windows and your disk 1 contains the old Windows. Disk 3 contains a 512MB Fat32 partition and I don't know what that is. I suggest you disconnect disk 3 for now before proceeding.

Let rebuild new BCD's for both disk 0, and disk 1. Please follow step by step on the 2 screen shots below. On step 3, write down the drive letter for PM981_New. In the screen shot, My Windows is still assigned to C but it might be different from yours. In step 10, if the drive letter is different than C, then use the letter in step 3.

Do exactly the same for disk 1, this time select disk 1 in step 4 and assign letter V in step 7, Use V and the drive letter for Old Windows in step 10. This will create a new BCD for PM981_Old and you will be able to boot separately from boot menu.

From boot menu, select which one to boot from.
Once booted into Windows. If you wish, you can set up dual boot for Windows old & New. Under This PC, look for the drive letter of the offline Windows and type:
bcdboot X:\Windows where X is the letter of the offline Windows

 

BCD File Rebuild and BIOS

Our IT department updated my pc to 1803 not realizing that I have an X299 motherboard and a Samsung NVME SSD boot drive. I came in the next day to get the BCD File error BSOD with error code 0xc000098 (a known bug but not fixed a year after discovery).
Our IT department looked up this issue and decided to rebuild my BCD file and was (we thought) successful implementing this solution. My pc then booted from the previous NVME SSD drive. I had migrated my OS from the 256GB SSD to a new 500gb SSD, both NVME.
No troubles for a year booting from the 500gb disk and now it boots from the old 256gb drive which I did not wipe on purpose. I boot into the UEFI ASUS bios on the pc and the boot order configuration only lists one option for position 1 to 4. Before each position
listed each bootable device. First of all why in the world would a Windows update and BCD file rebuild screw with the BIOS and second how do I get the proper C: drive boot with to way to change the boot order in the BIOS?

 

Windows 10 BCD Rebuild

So recently my laptop ran in to a Boot BCD error (0xc0000034) and I looked in to fixes for it and was about to reset windows before coming accross a tutorial on how to rebuild the BCD.

I'm currently on the command prompt after entering the bootrec /rebuildbcd and have this: