Windows 10: Cannot Update windows even after updating Intel RST

I updated my Intel RST, restarted the system, check the driver version in device manager and still cannot update my windows and it is showing same error

:)

 

Intel RST service is not running

Hi,

Thank you for writing to Microsoft Community Forums.

The Intel RST service is for the Intel Rapid Storage Driver. The Intel Rapid Storage Driver provides speed for data transfer and improves the performance for SATA drives or PCIe drives.

• What is the make and model of the computer and motherboard?
  

You can follow the methods mentioned below and check if that helps:

Method 1: Changing the startup type for Service

You can try changing the startup type for the Intel RST service and check if that makes a difference. Please refer the steps mentioned below:

1. Press and hold Windows key + R, to open
   Run dialog box.
   
2. Type serivces.msc and click on
   OK.
   
3. Now, scroll down, look for Intel RST service, right click on it and click on
   Properties.
   
4. Now, under startup type select Automatic from the drop down menu.
   
5. Click on Apply and OK.
   

Method 2: Updating the drivers manually

You can try downloading the latest version of Intel Rapid Storage Driver from the

Intel Website and check if that helps. However, I would suggest checking with the motherboard manufacturer website as well.

If you are using RAID configuration, I suggest you to post your query in

TechNet forums, where we have support professionals who are well equipped with the knowledge on RAID configuration.

Nikhar Khare

Microsoft Community - Moderator

 

Intel Readies P55 Chipset B3 Stepping Update

Intel's is readying a hardware update for its P55 Express chipset, currently the only core-logic for the company's brand new socket LGA-1156 processor platform. The new B3 stepping of the P55 PCH will bring with it a little more than new MM number and S-spec numbers. A list of changes is as follows:

• New MM number and S-spec numbers for the converted products;
• Firmware and minor BIOS updates are required with the conversion;
• Processor MRC/microcode update required to enable future processors;
• Recommended storage driver upgrade from Intel MSM 8.9 to Intel RST 9.5.

Although it is listed that the MRC update enables 'future processors', Intel, in a statement issued to X-bit labs assured that the current B2 stepping of the chipset (found on current socket LGA-1156 motherboards) does not leave out support for any of Intel's new LGA-1156 processors that are slated for release in the very near future. The dual-core "Clarkale" 32 nm processor will be supported by both B2 and B3 steppings of the chipset.

P55 B3 stepping is pin-identical to P55 B2, and hence motherboard vendors will not have to come up with new designs. Sampling of the new stepping began as early as on October 02, 2009, and it is scheduled for shipment to manufacturers by the 7th of December, 2009. P55 is the performance core-logic for the LGA-1156 platform. It supports Core i5 and Core i7 "Lynnfield" processors with discrete graphics.

Source: X-bit labs

 

Intel RST service

Since it's an upgrade, some software/drivers may need update to support Windows 10. Hence try updating the software/drivers to the latest version and then check.

Additionally, check with the software support for compatibility with Windows 10.

Latest version of Intel RST can be found here:

Download Intel® Rapid Storage Technology (Intel® RST) User Interface and Driver

Regarding WiFi, kindly contact the computer manufacturer support on compatibility with Windows 10.