Windows 10: Can’t access my router dashboard.

Hi all

I can’t seem to connect to my sky router dashboard on my PC. When I input the IP address in the address bar I get a “hmmmm.... can’t reach this page Err_connection refused” message.

I’m running windows 10 pro. Version 20H2 Build 19042.804 I also run hyperV on this machine.

I can access it perfectly on my phone but not on my pc. I run McAfee on both my pc and my phone but even so, I tried turning McAfee off on the pc in case the firewall was blocking access and I still got the same message.

I can ping the address 192.168.0.1 successfully both by IP address and by domain name.

I have checked the hosts file and I don’t see anything untoward there.

Any ideas? This has got me stumped!

Thanks.

submitted by /u/marknetwork1
[link] [comments]

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Unable to access my router

1. I already have a gateway configured in my house, so no, i'm not relying on this router for internet. However, I plan to make this into an access point in the very near future.

2.This is what I'm getting when i follow that step....

Autoconfiguration IPv4 Address. . : 169.254.205.6(Preferred
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :

So with this i tried 169.254.205.1 with unlucky results :/

 

Dashboard Rewards

Hi!

I can´t access to my dashboard rewards, why?

PD: I live in Georgia USA

Thanks!