Windows 10: Can't boot after Windows Update: dism /image:c:\ /remove-package produces error 14098 "The...

Hi there,


I'm attempting to recover a Windows 10 installation that borked during a Windows Update reboot. It's running as a Guest in a VirtualBox VM on MacOS, which kernel panicked during the Windows reboot.


Originally I received an INACCESSIBLE_BOOT_DEVICE error, which I resolved by booting from installation media and from the command prompt performing:


bootrec /scanos

bootrec /rebuildbcd

bootrec /fixmbr


Now I receive Automatic Repair couldn't repair your PC. Examining the log file D:\Windows\System32\logfiles\Srt\SrtTrail.txt everything is fine ("Result completed successfully") until it reports at the end:


Root cause found:

---------------------------

A recently serviced boot binary is corrupt.


Repair action: Abort pending update installations

Result: Failed. Error code = 0x3712

Time taken = 9016 ms


---------------------------

---------------------------


So I perform:


dism /image\ /get-packages


and sure enough it lists a whole load of packages, some showing:


State: Install Pending


However when I try to remove the last on the list this happens:


An error occured - Package_for_RollupFix Error: 0x80073712


Error: 14098


The component store has been corrupted.


The DISM log file can be found at X:\windows\Logs\DISM\dism.log

I also get a warning at the start of /get-packages:


The scratch directory size might be insufficient to perform this operation. This can cause unexpected behaviour.

Use the /ScratchDir option to point to a folder with sufficient scratch space. The recommended size is at least 1024MB.


However I've been unsuccessful getting the /ScratchDir option to produce anything other than an error.


Any help appreciated.

:)

 

Can't boot after Windows Update: dism /image:c:\ /remove-package produces error 14098 "The component store has been corrupted"

Hi there,

I'm attempting to recover a Windows 10 installation that borked during a Windows Update reboot. It's running as a Guest in a VirtualBox VM on MacOS, which kernel panicked during the Windows reboot.

Originally I received an INACCESSIBLE_BOOT_DEVICE error, which I resolved by booting from installation media and from the command prompt performing:

Code:

bootrec /scanosbootrec /rebuildbcdbootrec /fixmbr

Now I receive Automatic Repair couldn't repair your PC. Examining the log file D:\Windows\System32\logfiles\Srt\SrtTrail.txt everything is fine ("Result completed successfully") until it reports at the end:

Code:

Root cause found:---------------------------A recently serviced boot binary is corrupt.
Repair action: Abort pending update installationsResult: Failed. Error code = 0x3712Time taken = 9016 ms
------------------------------------------------------

So I perform:

Code:

dism /image:D\ /get-packages

and sure enough it lists a whole load of packages, some showing:

Code:

State: Install Pending

However when I try to remove the last on the list this happens:

Code:

An error occured - Package_for_RollupFix Error: 0x80073712Error: 14098The component store has been corrupted.The DISM log file can be found at X:\windows\Logs\DISM\dism.log

I also get a warning at the start of /get-packages:

Code:

The scratch directory size might be insufficient to perform this operation. This can cause unexpected behaviour.Use the /ScratchDir option to point to a folder with sufficient scratch space. The recommended size is at least 1024MB.

However I've been unsuccessful getting the /ScratchDir option to produce anything other than an error.

Any help appreciated.

 

How to: Create Windows 7 SP1 Disc with integrated updates, IE9, drivers

Integrate updates Windows 7

Excellent tutorial from Drone. If you are interested in slip streaming your own installation disc, this gives you a clear understanding of the process and allows control for customization. To automate the procedure you can create a batch file as the following example. This file updates all 64 bit versions, can remove lines to suit your needs. Unable to extract cab files if using WinRAR, at least the trial version.

location of .msu files, can be any location
*Windows6.1-KB* changed from "Windows6.1-KB2" to include more updates
name of AIO SP1 64 bit retail DVD
%% allows command to run in batch file
change to x86 for 32 bit, add this line for all 5 versions in 32 bit
Adds IE9, don't forget to place IE9-Windows7-x64-enu in C: and remove all files but IE9-Win7.cab

BATCH FILE:

mkdir C:\IE9
C:\IE9-Windows7-x64-enu /x:C:\IE9
mkdir C:\win7
robocopy M:\ C:\win7 /E /A-:R
mkdir C:\image\mount
mkdir C:\image\updates
robocopy G:\Windows7\A764bitSP1files\7Updates\new C:\image\updates /E /A-:R
cd\image
for %%a in (.\updates\*Windows6.1-KB*-x64.msu) do mkdir %%~pna
expand .\updates\*Windows6.1-KB*-x64.msu -F:Windows6.1-KB*-x64.cab .\updates
for %%a in (.\updates\*Windows6.1-KB*-x64.cab) do expand %%a -F:* %%~pna
del /Q .\updates\*
move C:\win7\sources\install.wim C:\image
dism /get-wiminfo /wimfile:install.wim /index:1
dism /Mount-Wim /WimFile:install.wim /index:1 /MountDir:mount
FOR /D %%g in (.\updates\*Windows6.1-KB*-x64) do dism /Image:.\mount /Add-Package /PackagePath:%%g
dism /image:.\mount /Add-Package /PackagePath:C:\IE9
dism /Unmount-Wim /MountDir:mount /commit
dism /get-wiminfo /wimfile:install.wim /index:2
dism /Mount-Wim /WimFile:install.wim /index:2 /MountDir:mount
FOR /D %%g in (.\updates\*Windows6.1-KB*-x64) do dism /Image:.\mount /Add-Package /PackagePath:%%g
dism /image:.\mount /Add-Package /PackagePath:C:\IE9
dism /Unmount-Wim /MountDir:mount /commit
dism /get-wiminfo /wimfile:install.wim /index:3
dism /Mount-Wim /WimFile:install.wim /index:3 /MountDir:mount
FOR /D %%g in (.\updates\*Windows6.1-KB*-x64) do dism /Image:.\mount /Add-Package /PackagePath:%%g
dism /image:.\mount /Add-Package /PackagePath:C:\IE9
dism /Unmount-Wim /MountDir:mount /commit
dism /get-wiminfo /wimfile:install.wim /index:4
dism /Mount-Wim /WimFile:install.wim /index:4 /MountDir:mount
FOR /D %%g in (.\updates\*Windows6.1-KB*-x64) do dism /Image:.\mount /Add-Package /PackagePath:%%g
dism /image:.\mount /Add-Package /PackagePath:C:\IE9
dism /Unmount-Wim /MountDir:mount /commit
dism /get-wiminfo /wimfile:install.wim /index:5
dism /Mount-Wim /WimFile:install.wim /index:5 /MountDir:mount
FOR /D %%g in (.\updates\*Windows6.1-KB*-x64) do dism /Image:.\mount /Add-Package /PackagePath:%%g
dism /image:.\mount /Add-Package /PackagePath:C:\IE9
dism /Unmount-Wim /MountDir:mount /commit
cd\
move C:\image\install.wim C:\win7\sources
oscdimg -lW7SP1 -t012/16/2011 -m -u2 -bC:\win7\boot\etfsboot.com C:\win7 C:\GSP1RMCMUXFRER_EN_DVD.iso

Can add the other lines in Drone's tutorial to include drivers.
All credit goes to Drone, this is just my modification of his work.

 

Error: 14098 The component store has been corrupted. In Windows Image Version: 10.0.10586.0

Hi

Error code: (0x80073712) for windows 10 update.

C:\>Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess
Deployment Image Servicing and Management tool

Version: 10.0.10586.0
Image Version: 10.0.10586.0
[==========================100.0%==========================]
Error: 14098
The component store has been corrupted.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log
C:\>

I am running into this error when trying to install the KB314098 update. Tried sfc /scannow: Beginning system scan.

I am not able to do more, i have tried different methods and still it dos not work.