Windows 10: cant connect my externsl HD

Device SCSI\Disk&Ven_Seagate&Prod_Expansion\6&2416492a&1&000000 was not migrated due to partial or ambiguous match. Last Device Instance Id: USBSTOR\Disk&Ven_SanDisk&Prod_Cruzer_Force&Rev_1.00\4C530000320522212102&0 Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318} Location Path: Migration Rank: 0xF000FC00FFFFF130 Present: false Status: 0xC0000719.

:)

 

Restoring Windows 10 Image using Macrium Reflect


In addition to the above. Here's my suggestion in step by step.
I assume you have Macrium Installed in your current HD and already made a backup copy.

1. Connect your new HD via USB port and boot up.
2. Run Macrium, click on Restore tab then select the Backup Image that you made to restore
3. click on "select a different target disk" then select your new HD as destination
   
   
   
4. Proceed to restore then Shutdown and disconnect the old HD and replace with the new HD
5. Boot up with your new HD.

 

hd6950 to hd 6970

ok
i ve tried everything:with atiflash from dos,winflash.step by step with bios powercolor hd 6970 from the database.
nothing,doesn´t work.any suggestion????

 

External HD Connection Problem

I have attached an external HD to my computer running Windows 10 and it will not show up in my drive list. The properties shows it as Seagate.ink - what is an ink file and any suggestions as to how I can get it to work?