Windows 10: Can't connect to network - only 5G WiFi doesn't work

CrimsonRuby11 · May 17, 2021

Hello,I have recently switched from Pop os to Windows 10, and I am unable to connect to the 5G network. The normal 2.4 GHz wifi does work, and 5G wifi did work when I was using Pop os. I have updated my drivers, updated windows and also checked my laptop's wifi card for damage, and nothing worked. I have posted some relevant screenshots. Thanks in advance!

:)

BetoLP · May 17, 2021

Windows doesn`t start. Authomatic repair doesn`t work.

Thanks again!!

You had errors on drive. My second language skills are terrible. Looks like they were fixed.
Click to expand...

I`m sorry I had not noticed that the text on the picture was in spanish. It says that windows has replaced some damaged clusters in "name" file and "directory". Then, at the end "an unspecified error occurred (75736e6a726e6c2e 4f6)".

Run the other tools I suggested. Particularly the seatools.
Click to expand...

I`ll do it and I`ll be updating this thread when I have the report.

- - - Updated - - -

I ran SeaTools. These are the results:

Does it mean my HDD is useless?

Brink · May 17, 2021

T-Mobile Launches World's First Nationwide Standalone 5G Network

Standalone 5G allows the Un-carrier to massively expand its 5G footprint, bringing next-gen connectivity to more places while paving the way for future groundbreaking applications

What’s the news: T-Mobile is the first operator in the world to launch a commercial nationwide standalone 5G network … and with this move, the Un-carrier is expanding 5G coverage by 30 percent, now covering nearly 250 million people in more than 7,500 cities and towns across 1.3 million square miles!

Why it matters: Standalone architecture is the future of wireless connectivity, bringing 5G closer to reaching its true potential with faster speeds, lower latency and massive connectivity. It will pave the way for new applications and supercharge things like mobile augmented and virtual reality, cloud gaming, real-time translation and so much more.

Who it’s for: Everyone, because T-Mobile is building #5GforAll

BELLEVUE, Wash. — August 4, 2020 — This is some next level 5G. T-Mobile (NASDAQ: TMUS) announced today it is the FIRST IN THE WORLD to launch a commercial nationwide standalone architecture (SA) 5G network. The move immediately expands the Un-carrier’s 5G footprint — already the nation’s largest — to nearly 2,000 additional cities and towns, brings 5G deeper into buildings and sets the stage for future groundbreaking applications. In other words, SA 5G is the future, and T-Mobile is leading the charge to bring it to life.

To celebrate the milestone and the arrival of 5G for the first time in hundreds of small towns across America, T-Mobile used drones to light up the sky over Lisbon, ND, letting people in the small town know “5G is here”. The Un-carrier plans similar celebrations in the future. Check it out in the video below:

“Since Sprint became part of T-Mobile, we’ve been rapidly combining networks for a supercharged Un-carrier while expanding our nationwide 5G footprint, and today we take a massive step into the future with standalone 5G architecture,” said Neville Ray, President of Technology at T-Mobile. “This is where it gets interesting, opening the door for massive innovation in this country — and while the other guys continue to play catch up, we’ll keep growing the world’s most advanced 5G network.”

Taking 5G Next-Level

The first phase of 5G has focused on delivering new 5G radio capabilities while leveraging existing LTE core networks and has been key in accelerating 5G deployment. Now T-Mobile’s new 5G core is coming to life, which in the future can unlock blazing fast speeds in more places, real-time responses and massive connectivity. SA, especially when coupled with core network slicing in the future, will lead to an environment where transformative applications are made possible — things like connected self-driving vehicles, supercharged IoT, real-time translation … and things we haven’t even dreamed of yet. In SA areas, T-Mobile engineers have already seen up to a 40% improvement in latency during testing, and that is just the beginning of what can be done with Standalone 5G.

In the near-term, SA allows T-Mobile to unleash its entire 600 MHz footprint for 5G. With non-standalone network architecture (NSA), 600 MHz 5G is combined with mid-band LTE to access the core network, but without SA the 5G signal only goes as far as mid-band LTE. With today’s launch, 600 MHz 5G can go beyond the mid-band signal, covering hundreds of square miles from a single tower and going deeper into buildings than before. Thanks to T-Mobile’s ongoing 5G build, and by flipping the switch on SA, the Un-carrier has immediately increased its 5G footprint by 30 percent — now covering 1.3 million square miles in more than 7,500 cities and towns across the country.

Let the Maps Do the Talking

In what Verizon and AT&T likely refer to as “the good old days,” they led in coverage and weren’t shy in telling the world about it.

Oh, how times have changed.

It’s a new era in wireless, and T-Mobile holds the 5G coverage crown. Adding the SA coverage boost to America’s first and largest nationwide 5G network, T-Mobile further dwarfs the competition. The Un-carrier’s 5G network is more than two times bigger than AT&T’s and more than 10,000 times bigger than Verizon’s! Just look at the maps, and it’s clear why Verizon customers can only connect to 5G ZERO-POINT-FOUR percent of the time.

Building the future takes a lot of work. To make the world’s first nationwide commercial SA 5G network a reality, T-Mobile partnered closely with Cisco and Nokia to build its 5G core, and Ericsson and Nokia for state-of-the-art 5G radio infrastructure. OnePlus, Qualcomm Technologies and Samsung have helped the Un-carrier ensure existing devices can access SA 5G with a software update, based on compatibility.

For more information about T-Mobile’s 5G vision, visit: www.t-mobile.com/5g. To see all the places you’ll get T-Mobile’s current 5G down to a neighborhood level, check out the map here: www.t-mobile.com/coverage/5g-coverage-map.

Follow T-Mobile’s Official Twitter Newsroom @TMobileNews to stay up-to-date with the latest company news.
Click to expand...

Source: T‑Mobile Launches World’s First Nationwide Standalone 5G Network | T‑Mobile Newsroom

brannell · May 17, 2021

Can´t connect to my Wifi network

Hi everyone,

I can´t connect to my Wifi from my desktop with Window 10. I had an ethernet cable before and it worked perfectly but now I can´t connect my computer to the router through the cable anymore.

For some reason it detects my wifi network but when i try to connect it says i cant connect.

I followed a few tutorials online of how to fix it and still didn´t work.

any help please???

thanks in advance

Ramon

Windows 10: Can't connect to network - only 5G WiFi doesn't work

Can't connect to network - only 5G WiFi doesn't work

Can't connect to network - only 5G WiFi doesn't work

Can't connect to network - only 5G WiFi doesn't work

Can't connect to network - only 5G WiFi doesn't work - Similar Threads - Can't connect network

"Can't connect to network" when trying to connect to the 5G variant of my wifi, but I can...

5G WiFi network not shown

5G WiFi network not shown

Can't connect to 5g network

Can't connect to 5g network

Can't connect to 5g network

Laptop only connects to 5g not regular WIFI

can't see my 5G wifi network

Wifi stop working. Win10 shows only one network and it doesn't connect