Windows 10: Can't detect router.

I live in a 2 bdrm house,I sit on the front porch truth connect to my router which is in a room in the back of the house I turn on wifi on my phone and I constantly pick up other signals but not my own. When it shows it says 2-3 bars & when it doesn't my phone shows 0-1 bar spots. Can someone explain to me why/how this is possible?* Moved from Community Center

:)

 

E63 doesn't detect my Netgear Router (wgr614 v6)

E63 does not detect my netgear router (wgr614 v6). My T-Mobile SDA and T-Mobile Shadow, can detect it easily and also connect successfully.



Here are the settings I have on router:

Security: WEP

Auth: Automatic

Encrypt: 64 bit

Channel: 6

Mode: g and b



All my laptops also connect through this router, but E63 cant even detect it.. is there something wrong..? My router broadcasts, I mean it is not hidden.. any help/suggestion..?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Need new Router

Doesn't your ISP has a list of suggested routers? If not, look for 802.11 AC Wireless routers.