Windows 10: Can't enable two ethernet adapters simultaneously

Hello,I want to use two Ethernet adapters, two physical network cards simultaneously. On the picture below the Ethernet 3 adapter is a network card connected to my ISP.The Ethernet adapter displaying there is no cable connected although there is a cable is my second network card used for LAN. It was working until few updates ago. Now, when I turn on the Ethernet adapter the Ethernet 3 goes to disabled state. I need them both to be running. Is there any way how to enable them and use simultaneously again?Thank you

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

enable ethernet / fix wifi adapter

how to enable ethernet adapter I don't see it in the network adapter list it was there when I disabled it.

Also my net freezes every 10 minutes saying the gateway is not accessible It's doing it on both of my computers.HELP!!

 

Utilise cellular and ethernet network adapters simultaneously in Windows 10

In windows 7 I could always do a remote session into a network over 4g and still utilise the ethernet adapter to access the local subnet and its devices from a remote location.
Windows 10 build any build... if WWAN network adapter [4g] in use, the operating system will drop the active connection if the network adapter is enabled. How can I get the network adapters to
work simultaneously in Windows 10?