Windows 10: Can't get a shared printer to be usable by other users home network

I have an HP Laserjet M14-M17 PCLmS attached to Lenovo Thinkpad with Windows 7 Pro and shared it to my network home. When viewing devices from other computers, I can see the computer and printer, and try to connect/install it. I get the "Connection to printer on computer then a "Windows couldn't connect to the printer, check the printer name and try again... make sure printer is connected and turned on... etc...". I can print from the Lenovo with no problem. The other printers are newer with newer windows versions. Is this impossible through the older windows version in the Len

:)

 

Can't share printer—getting error message

Yeah, I have windows firewall disabled, and I don't use any other firewall... mostly to prevent stupid issues like this.

None taken... and yeah, I do.

 

printer won't work on network but will over usb

his printer has a built-in print server.

What you need to know what ip is being give to the printer. Perhaps you can print a status sheet from the printer.

Then Go to printers in control panel

add a new printer

local printer attached, uncheck automatically detect and install PnP printer

create a new port, select standard tcp/ip port

a new window should open and enter the ip there where it says printer name or IP address (port name then should be also be filled as you go)

and pretty much follow the rest of the steps, you will need to install the printer drivers.


These steps is the easy, but not the right way.

The right way is to use the network option on the initial screw and search for the printer server...but that can be tricky to configure.

 

Can't share printer—getting error message

Step 1: Go to store.
Step 2: Buy a less shitty printer.
Step 3: Pick up some beer while you are there.
Step 4: Enjoy both your new printer and your beer.

In all seriousness, I have had more issues with Lexmark printers and their shitty drivers then any other manufacturer, HP is a close second though.

However, if you don't want to get a new printer*Laugh :laugh:, and I can understand that, when my Lexmark was giving me the same troubles in Win7(and Vista) I had to make sure the Windows firewall was ON and the firewall service was enabled and running. After I shared it I could re-disable the firewall and firewall services.