Windows 10: Can't install Windows 11 due to secure boot issue

I have installed a new Windows 11-compatible processor see specs below. I have updated the BIOS multiple times to the latest version. When I try to install Windows 11 I get an error message saying the computer isn't capable of a secure boot. When I try to follow the steps to remedy this following the steps outlined at https://support.microsoft.com/en-us/windows/windows-11-and-secure-boot-a8ff1202-c0d9-42f5-940f-843abef64fad, I a not able to change the UEFI Firmware Settings because this option does not appear under "Advanced Options." What should I try next?Thanks,SamDevice name DESKTOP

:)

 

Windows 8 Secure Boot Feature: Not So Secure?

• Linux
• Linux
• Linux
• Linux
• Oh and OSX

Here is a statement from a Kernal Developer at Red Hat:

I'm not sure this exploits the legacy BIOS but rather it exploits the legacy boot method on MBR drives, injecting a signed key before the OS boots, which you are correct in that it has nothing to do with Windows 8. And the simplest fix would just be to require boot drives use GPT when Secure Boot is enabled in UEFI.

 

Windows 8 Secure Boot Feature: Not So Secure?

So Linux is switching to secure boot also? Or they have to because of UEFI?

 

Secure boot isn't turning on in HP laptop (windows 11)

Hello Mohd_357,

Welcome to Microsoft Community.



I understand the frustration you’re facing with Secure Boot on your HP laptop. Let’s troubleshoot this issue step by step:

1. Load HP Factory Default Keys:
   
   • Go into the BIOS settings.
     
   • Navigate to System Configuration > Boot Options.
     
   • Look for an option to Load HP Factory Default Keys. If available, select it.
     
   • Check if Secure Boot becomes available after doing this.
     
2. Disable Fast Startup:
   
   • Boot into your operating system (Windows 11).
     
   • Open Settings.
     
   • Go to Updates & Security > Recovery.
     
   • Click Restart Now under “Advanced startup.”
     
   • Wait for your PC to boot into the system recovery menu.
     
   • Select Troubleshoot and then choose Advanced options.
     
   • Finally, select UEFI Firmware Settings.
     
3. Check BIOS Mode:
   
   • Ensure that your Windows 11 installation is in UEFI mode, not legacy mode.
     
   • If your notebook’s BIOS mode is set to legacy, you won’t be able to enable Secure Boot. You may need to reinstall Windows 11 from an EFI boot source.
     
4. Reset BIOS settings to Default:
   
   • Reset BIOS settings may restore secure boot settings to normal factory state.
     

Regarding TPM 2.0:

• Your PC may not have TPM (Trusted Platform Module) support, which is required for Windows 11.
  
• Additionally, Windows 11 requires an Intel 8th gen core processor or newer.
  

I hope it can solve your problem.

Thank you for your patience and cooperation.



Best Regards,