Windows 10: Can't install windows 7 in a New Mini Pc , Keyboard and mouse stop working when the screen...

Hello , and sorry for my english if i make some mistakes .


I've got a brand New Mini Pc , with i9 10880 and Windows 10 64bit


I tried to made a dual boot , or even connect my SSD DRIVE already with Windows 7 ultimate , but the same things happens ...


For the dual Boot : After the Bios screen , windows is loading files from the USB ISO FILE , and then the blue screen appears to set the langage .


Unfortunately , i'm stuck here . Why? because the keyboard and mouse disconnect . I'm not allowed to use them they were working fine on the bios ..





I was thinking it was something with the USB 3.0 OR 2.0 . My mini Pc has 4 USB 3.0 and 2 USB 2.0 , so i'm connecting my hard drive to these USB 2.0 ports ..



For my SSD drive with Windows 7 already installed : After the Bios screen , i'm arriving at the USERS SCREEN administrator , guest etc and same thing . I can't chose because Keyboard and mouse are not working anymore ...


This is so crazy !!!!



Windows 10 didnt have any problem with that. And i'm using the USB 2.0 port in case it's a compatibility problem ...


In My bios , all is enabled

:)

 

Mouse and keyboard don't work on Windows install

Its a new build i was trying to install my windows os

Thanks for your help my PS keyboard is working unfortunately my usb mouse/keyboard still do not work even after having my OS installed. How would i go about selecting to load the driver packages?

 

Wired Keyboard and Mouse Stop Working - Windows 10

Wired Keyboard and Mouse Stop Working - Windows 10
I have an old Dell Studio that is running windows 10 ---

Ir has Windows 10 and SSD installed - to me it does what it needs to do but this darn mouse and keyboard stuff stopping working with no rhyme or reason is making me very frustrated.

Keyboard and Mouse are wired - NOT WIRELESS

• I cannot easily unplug and plug in the mouse/keyboard to get it going again... they are still lit up but they are dead basically and I have to do a hard reset.
  
• USB selective suspend is disabled.
• I checked the drivers for the keyboard and mouse and they are updated.
• I checked to see if PC has KB4074588 and it does not.

I am not sure what else to do.... I can go days without the issue and then days where anytime I step away from the PC it stops working.

I can say when it is working it just does not just stop ... only when I walk away and the machine is idle or the screen is locked.

Any suggestions would be appreciated.

 

Mouse and keyboard don't work on Windows install

Hi there, i seem to have found the issue. I don't believe Windows 7 Pro x64 has XHCI drivers readily available for the new boards.

I was working on a Lenovo M700 today, and having my OCD, wanted to put in a fresh install of Windows 7 Pro 64 bit. Bios could see the keyboard and mouse fine, but get to windows install screen, no response... After screwing around with BIOS settings, updating firmware on BIOS, and clearing the CMOS using the Jumper, i seem to have found a solution.

Under USB settings of your board, if you see a feature called USB KBC or something like that, that creates virtual drivers for limited use of keyboard and mouse, enable it. This will allow the keyboard and mouse plugged in via USB to work as if they're plugged into the PS/2 port (in this units case, they had PS/2 ports, but i'm using a Microsoft Wireless Comfort 2000 desktop set - so was using USB).

It's working fine now, and once windows is installed, i'll disable the feature, as the windows updates will have the XHCI drivers needed to support this set. Good luck!