Windows 10: Can't ping default gateway IP address

The client can’t access the internet. For troubleshooting, we ask her to ping default gateway, for example, ping 192.168.1.254. She gets general failure. What we have done:1. run netsh to enable autoconfig,Restart the computer.2. Run netsh to delete arp, for exampleRestart the computer3. Run netsh reset, for exampleRestart the computer4. Run admin command prompt, run DISM/SFC:dism.exe /online /cleanup-image /restorehealththenSFC /SCANNOWRestart the computer.5. Try to disable it by running this command;netsh int ipv6 isatap set state disablednetsh int ipv6 6to4 set state disablednetsh

:)

 

Unable to ping IP address from a specific LAN port

Hi All,

I am observing a issue in which I am unable to ping a IP address is my wireless connection is enable.

Setup:

in my LAN port "Local Area Connection" I have configured manual IP address: 10.146.0.59. subnet mask : 255.255.255.128. Gateway IP: 10.146.0.1

I have also connedcted my Laptop with wifi having IP address: 192.168.43.135. subnet mask : 255.255.255.0.

Now when I am trying to ping IP address : 10.211.119.2, request timeout is observed. But if I disable my wifi I am able to ping the IP address.

Kindly Help.

 

Unable to ping or see external IP addresses

On a Windows 10 computer, I have good network connectivity and can access websites with no problem, but the "connect" window in Jamulus that's supposed to display all connected servers was empty. Comparing with others on the network, we discovered one apparent
symptom/problem: I can't ping any IP addresses. I tried several valid IP addresses (as verified by others who successfully pinged on their Windows computers) and they all timed out. I was able to ping
www.google.com and www.microsoft.com, but failed trying to ping google's IP address 8.8.8.8 .

-The problem is not in my cable modem/router (Arris Surfboard) because using the I
was able to ping to all the IP addresses using Arris' Ping WAN Utility.

-I tried turning off Windows Defender Firewall, then rebooting the computer, but still couldn't ping any IP addresses.

-I ran Command Prompt as administrator and executed

"ipconfig /flushdns" , then "ipconfig /registerdns"

and rebooted, but still no success.

I'm guessing there's some Windows setting that's not allowing me to ping and that's also blocking Jamulus from seeing other computers on its network.

Please provide suggestions on what and how to check any other settings that may be causing this problem.

 

Windows 10 default gateway repeatedly not available

I used the term "loosing default gateway" because when the troubleshooter fixes the problem it says that the problem was that the default gateway wasn't available, so I figured my adapter somehow lost connection to it or something similar had happended.

I looked up the Default Gateway's IP as you suggested and there was an IPv4 and also an IPv6 address next to it. Although I couldn't ping any other computers on the network. When I tried to renew my address after release The cmd just printed out "Windows
IP configuration" but it timed out, and couldn't finish properly.

In the event viewer there are two warnings about an URL couldn't be resolved, other than that just information events.