Windows 10: Can't reset my pc, I really need your help guys :(

So I need to reset my pc completely and delete everything on the computer besides the apps that came with the pc at first. So I started the process, and I reached the part where my monitor showed me how much % till it is completed. Now to the problem- Every time it gets to 34 or 65%, it gets stuck and than says "Undoing changes", and after that my pc is just the same and i get the massage "there was a problem resetting your PC, no changes where made"... I have tried to reset my pc like 10 times already and same thing happens.



Could really use ur help guys

submitted by /u/Yoni111121
[link] [comments]

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

2 x SSD Raid 0 - is this right?

Hey Fits

Can you list a few helpful hints for T ski ,maybe a step by step how to OR what to look out for*Cool

 

Calling all ATI guru's...I need some help please

Thanks again for all the suggestions and help guys. I got the card working in single GPU mode. And it's now listed for cheap in the classifieds *Smile

http://forums.techpowerup.com/showthread.php?goto=newpost&t=117646