Windows 10: Can’t set my admin account as default user Win10

My Windows 10 HP laptop froze. I had to hold the power button down to shut off, then restart. When it rebooted, my admin user sccount was no longer the default. I can only access my documents, photos, etc. by going to C: and selecting Users then my sccount.


I’ve followed online instructions to try to make my Admin account the default Control Panel, manage accounts, etc. The only account that shows is my admin account and it is using only my email account for Microsoft but no name. It only shows the account as Administrator and does not include Local as i see on an older laptop also running Windows 10 that is working correctly.

How do I modify my existing Admin account or add a Local account that is the default on start-up and accesses my current files?

:)

 

Settings can't be opened using the built-in administrator account


Hello,
Unfortunately I have the same issue as Dabz from upgrading win7 to win10.
I've tried opening settings using all the suggested methods and it will not load using my account with Administrator access nor the built-in Administrator profile. I also tried other methods not listed such as using Run. Control panel is just a stepping stone to add users in Settings.
I'm also having explorer.exe issues, which I believe is preventing Settings from loading.
Using cmd (Admin) I successfully created a new user profile [and granted admin access also using cmd (Admin)], however win10 will not allow this account to log on. win10 does not list this new user within control panel but it does in the start menu. win10 will not allow to log in or switch to the new account via the start menu either.
I can access settings in Safe Mode but this will not allow me to create a new account.
Any help/suggestions will be greatly appreciated.
Cheers

 

My admin account switched to a user account!

The first of the many diagrams in this thread show that the link Sign in with a local account instead is displayed for the account that is currently logged on and so the reversion procedure might work for this account. For normal circumstances, that would initiate the conversion back to a local account for the user account currently logged in - see my 23rd & 26th September 2016 posts in revert to local account from one converted to MSAccount. I have no way of knowing how Windows will react to an attempt to use this procedure for the Built-In Admin account and I do not know if that link Sign in with a local account instead will be displayed or not.

I think I side-stepped this issue by suggesting that that

• An extra password-protected Admin level account is created, and
• The Built-In Admin is disabled, and
• The recovery attempt focuses on whichever existing user account remains active afterwards.

Personally, I would reinstall Windows 10 without even attempting this recovery. Installation takes very little effort once everything is backed up and the only necessary user interactions are right at the start & right at the end so it can be initiated before making a pot of tea. It took about 30, 60 & 90 minutes for each of my computers [the 30 minuter is 6 months old, the 60 minuter is 7 years old, 90 minuter is 12 years old].

Raner - I am trying to avoid sounding like I am nagging you into doing a clean install.

• Once you have recovered the existing user account you can attempt to re-enable & remove the MSAccount link from your Built-In Admin if that link appears in Settings, Accounts.
• Bree says it cannot be done and I think the same but I have never tried - I have never been able to get to Settings using the Built-In Admin because it cannot run any Windows 10 Apps so I do not know how it can be done [but the diagrams in Bree's link shows that those users got there].
• Even though I have the safety of having created two spare password-protected Admin accounts I would not want to know that my Built-In Admin was sitting in the background but unable to help me if my other accounts were corrupted.

Denis

 

admin settings on Win10 for PC

Hi Hamza,

Is your PC connected to a domain network?

If your are connected to a domain network and yet facing this issue, I would suggest you to try the following steps and check:

Method1:

First, I would suggest you to try switching your User account from a Microsoft account to a local account and check if the issue persists. Click on 'Settings', click on 'Accounts' and then click on "sign in with a local account' in the "your accounts' section.
Restart the computer and switch back to a Microsoft account and check.

If the issue persists, try these steps and check:

• Open the Task manager. Here’s a tip: Press CTRL+Shift+ESC.
• Click File > Run New Task
• Make sure you have a check mark beside “Create this task with administrative privileges”
  
• Type Powershell
• Type the following in the Powershell prompt:
  
  $manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + '\AppxManifest.xml' ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest
  
• Close the Powershell window
• Reboot

Try these and let us know the results.