Windows 10: Can't start because of a file called spaceport.sys

savvaschristoforou · Apr 15, 2022

One day i shut down my computer then turned it on but when i turned it on it said it had to recover so i pressed enter to continue but when i did it showed that my device needs to be repaired, the file spaceport.sys with error code 0xc00000e9. Because trying again didn't work i did start up settings. when i tried to use any of the options it came back to the same place. And i have important files on it. Any help?

:)

Brink · Apr 15, 2022

AT&T Activates Call Validation Displays

AT&T Activates Call Validation Displays

Samsung Galaxy S10, Galaxy S10+, LG V40 ThinQ and AT&T Digital Home Phone Service Can Now Show That a Call Is Authenticated

AT&T* has turned on its first phone displays that let you know an incoming call is really from the number appearing on Caller ID. This fights against “spoofing” of phone numbers – a trick used by many illegal robocallers.

Most AT&T customers with a Samsung Galaxy S10, Galaxy S10+ and LG V40 ThinQTM will see a special display when an incoming call has been authenticated. They will see a green checkmark and the words, “Valid Number.”
Consumers with AT&T Phone digital home phone service also can activate the feature. It will give them a “[V]” for valid number.

Phone service providers have jointly developed a technology – the SHAKEN/STIR standards – to digitally validate calls. This won’t solve the problem of unwanted robocalls by itself. But it can give consumers greater confidence and control over the calls they answer.

“This is another step to tame annoying, unwanted robocalls,” said Kevin Petersen, AT&T senior vice president, Postpaid Wireless Products. “In the coming year, we’ll continue to take more steps and put more pressure on the bad guys.”

AT&T is rolling out its SHAKEN/STIR display as part of its AT&T Call Protect service, which is being added at no charge to millions of mobility consumer lines. AT&T Call Protect blocks or labels suspected illegal and unwanted robocalls.

This strategy will give a multiplier effect to call protection: A “valid number” on an AT&T device means the incoming call has been authenticated by SHAKEN/STIR and passed through AT&T Call Protect screening.

Here are some other key points:

A call that shows “valid number” has been verified and can increase your trust level. But a call without the label may still be a legitimate call. More calls will be marked with “valid number” over time, as more network providers implement SHAKEN/STIR and link to each other.

AT&T has rolled out AT&T Call Protect automatically to many Samsung Galaxy S10, Galaxy S10+ and LG V40 ThinQ users. Others are on the way soon.1 If you’re not seeing call validation on those devices when you accept their latest software update, you don’t have to wait. You can download the AT&T Call Protect app, or turn on the service from your account settings in myAT&T.

AT&T Phone digital home phone users can opt-in to get AT&T Digital Phone Call Protect and call validation. Just go to your account settings on myAT&T and turn it on.

Validation displays will be added to more mobile devices in the new year.

Finally, a “valid number” display helps fight against bad guys, but it can never guarantee an individual caller is a good guy. Consumers should always use their best judgement when answering calls from strangers.

Click to expand...

Source: AT&T Activates Call Validation Displays

Deepika Gowda · Apr 15, 2022

RPC call failed

Hi,

Thank you for posting in Microsoft Community, we appreciate your interest in Windows 10.

As you receive an error: The remote procedure call failed, I suggest you to check the status of Remote Procedure Call locator service.

Step 1: Make sure the Remote Procedure Call status is Started and set to Automatic. RPC Locator should be set to Manual. Follow the below steps for the same:

Press Windows + R keys from the keyboard to open
Run command.

Type services.msc in the search box and press
Enter.

Search for the Remote Procedure Call locator service

Make sure the Start-up type is Manual.

Steps to set the services to Automatic

Right click on the service

If the service is stopped then Start the service

Select Properties

And in the Start-up type, select Manual.

Step 2: If the service is already started and set to manual, then run
System file checker (SFC) scan on your computer.

System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files.

Follow the below steps:

Right click on the Start button, click on
Command Prompt (Admin).

Type “sfc /scannow” without the quotes and hit
Enter.

After the scan, restart the computer and check for the issue.

Hope it helps. Kindly get back to us with an updated status of this issue for further assistance.

Jsssssssss · Apr 15, 2022

Ransome malware "Files are locked.txt"

I think that's a ransomware called PClock...

Suggestion to read the following threads and, if needed, to ask for further help there:

New PCLock (updated) infection!!! - Ransomware Help & Tech Support

PClock Ransomware Support and Help Topic - Ransomware Help & Tech Support

Also make sure to read/do
http://blog.emsisoft.com/2017/02/16/how-to-remove-ransomware-the-right-way-a-step-by-step-guide/

Windows 10: Can't start because of a file called spaceport.sys

Can't start because of a file called spaceport.sys

Can't start because of a file called spaceport.sys

Can't start because of a file called spaceport.sys

Can't start because of a file called spaceport.sys - Similar Threads - Can't start file

Can't start Powershell Because of Defender's Quarantine

CONNECTED but can't start the CALLS function

CONNECTED but can't start the CALLS function

Can't start because of a file called spaceport.sys

Can't start because of a file called spaceport.sys

Can't start the laptop because of the blue screen

Unknown file wont delete called "Enelo64.sys"

sys file

Program Can't Start Because Combase.dll is Missing...