Windows 10: Change Boot In MsConifg Now no display

This is a strange problem but, I changed my boot settings in MsConifg so my CPU and ram are all being used at boot but no my laptop will no longer output display to HDMI. The problem is my laptop screen was broken before this, so I have no way to see what's happening on the laptop. It turns on and the fans run but I get no HDMI output.

:)

 

Changing boot hdd

I downloaded PartitionMagic8.0, but the partition i want to make is not bootable.
So the system boots from the old, loud hdd, and when i unplug the old, it doesnt boot.
Any advice or suggestions how to change boot hdd without reinstalling Winxp?

 

Display resolution keeps changing

Hi Rick,

It might be caused by a faulty driver that's why your display resolution keeps changing. We
suggest that you uninstall and reinstall the display driver, see steps below:

• Press Windows key + X and click on
  Device Manager.
• For graphics cards, expand the Display adapters category, right click your graphics card and select Uninstall.
• Restart your PC and Windows will attempt to reinstall the driver.

Let us know if you have any other questions.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.