Windows 10: Charging Issues After Windows 11 Update KB5041587

I've recently installed the 2024-08 Cumulative Update Preview for Windows 11 Version 23H2 KB5041587 on my laptop. Since then, I've been experiencing intermittent charging issues. The charger seems to get shut off automatically after approximately 5 minutes, and I have to restart the power switch to resume charging. This doesn't appear to be a hardware problem as the same doesn't occur when I'm using Ubuntu 22.04 LTS on the same system via dual booting.I've already tried the following steps without success:Updated battery driversUpdated BIOS and GPU driversUpdated the operating systemRan th

:)

 

Lenovo Yoga 2 11 plugged in (but not charging) potential driver issue

1) The logs were unremarkable.

2) Run the full custom Lenovo hardware diagnostics (including battery) > post images into the thread
laptops and netbooks :: yoga series :: yoga 2 11 notebook lenovo :: 80cx :: 59404951 :: yb02214724 Lenovo PC Support - US

Run through the troubleshooting steps in these links:

How to fix a Windows 10 laptop that's plugged in but not charging - CNET

How to Troubleshoot Battery Not Charging Issues in Windows 10

 

Laptop no longer charging since Windows 10 update

Thanks for the response, but the issue is not the battery or the laptop. It was charging and working fine prior to this most recent Windows 10 update.

I'm sorry, I don't understand what you're trying to say. When the charger is plugged in, it just says "plugged in", but my battery has been at 2% for the past several hours. Obviously the charger is doing something since it's holding the 2% power, but it's not charging. There has to be some day to bypass whatever this update broke.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.