Windows 10: chkdsk ETA is over 250h

Discus and support chkdsk ETA is over 250h in Windows 10 BSOD Crashes and Debugging to solve the problem; Hi,I experienced some minor file corruption on my secondary drive Toshiba P300 4TB HDD and decided to run "chkdsk D: /r" to try to fix the problem.... Discussion in 'Windows 10 BSOD Crashes and Debugging' started by chkdskout, Jul 30, 2022.

  1. CHKDSKOUT
    chkdskout Win User

    chkdsk ETA is over 250h


    Hi,I experienced some minor file corruption on my secondary drive Toshiba P300 4TB HDD and decided to run "chkdsk D: /r" to try to fix the problem. Everything was fine until the console stopped updating at Stage 4 "28000 of 528112 done". The ETA back then was 8h. The console updated again after replacing bad clusters, showing 48h. The ETA continued to rise with every update to now 266h.I have been running chkdsk now for 44h but there's no way I will run it for two more weeks.Are the ETA numbers correct and if not, how can I approximate the actual time left?And if it's too long, is there a sa

    :)
     
    chkdskout, Jul 30, 2022
    #1
  2. MRCL
    MRCL Win User

    ETA for 5970 water block?

    Aquatuning lists the EK 5970 blocks eta 14th of december. For Europe, that is.
     
    MRCL, Jul 30, 2022
    #2
  3. JELO SEN
    Jelo Sen Win User
    chkdsk c: /F

    It might be an error on the drive. We suggests that you follow the troubleshooting steps below:

    • Run Disk Cleanup utility to clear your junk files.
    • Open an elevated CMD type sfc /scannow and hit Enter to run the System File Checker.
    • Once the scan is completed, restart your computer. Remember to exit ChkDsk
      during boot.
    • Next, again open CMD as admin type
      Dism /Online /Cleanup-Image /RestoreHealth       and hit Enter to repair the Windows image.
    • Now see if ChkDsk able to complete the scan.

    Note: Before doing the steps, make sure you save a back up of your files.

    Let us know how it goes.
     
    Jelo Sen, Jul 30, 2022
    #3
  4. KD8TZC
    KD8TZC Win User

    chkdsk ETA is over 250h

    Robocopy and /ETA switch


    I have a few batch scripts to backup or restore files, and for some of them, I have the /ETA switch in them as they will move some larger files. In W7, It would always give the time to transfer, but in Win10 (x64), this switch doesn't seem to do anything. When I do Robocopy /? it lists the ETA switch, but nothing happens.

    My question is does anyone know if this eliminated this switch in W10? Anyone know of anyways to get it back (will robocopy from W7 work on W10 you think?)
     
    KD8TZC, Jul 30, 2022
    #4
Thema:

chkdsk ETA is over 250h

Loading...

  1. chkdsk ETA is over 250h - Similar Threads - chkdsk ETA 250h

  2. Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...

    in Windows 10 Gaming
    Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...: I ran chkdsk /r /f on my PC to try to fix an error caused by OneDrive couldn't delete a folder due to an error which said "The Tag Present in the Reparse Point Buffer Is Invalid" and then rebooted my PC in safe mode. So now it's showing "Fixing C:" etc on my screen and I'm...

  3. Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...

    in Windows 10 Software and Apps
    Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...: I ran chkdsk /r /f on my PC to try to fix an error caused by OneDrive couldn't delete a folder due to an error which said "The Tag Present in the Reparse Point Buffer Is Invalid" and then rebooted my PC in safe mode. So now it's showing "Fixing C:" etc on my screen and I'm...

  4. Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...

    in Windows 10 BSOD Crashes and Debugging
    Does chkdsk /r /f check every drive and is the ETA time for all drives or just the current...: I ran chkdsk /r /f on my PC to try to fix an error caused by OneDrive couldn't delete a folder due to an error which said "The Tag Present in the Reparse Point Buffer Is Invalid" and then rebooted my PC in safe mode. So now it's showing "Fixing C:" etc on my screen and I'm...

  5. chkdsk ETA is over 250h

    in Windows 10 Gaming
    chkdsk ETA is over 250h: Hi,I experienced some minor file corruption on my secondary drive Toshiba P300 4TB HDD and decided to run "chkdsk D: /r" to try to fix the problem. Everything was fine until the console stopped updating at Stage 4 "28000 of 528112 done". The ETA back then was 8h. The console...

  6. chkdsk ETA is over 250h

    in Windows 10 Software and Apps
    chkdsk ETA is over 250h: Hi,I experienced some minor file corruption on my secondary drive Toshiba P300 4TB HDD and decided to run "chkdsk D: /r" to try to fix the problem. Everything was fine until the console stopped updating at Stage 4 "28000 of 528112 done". The ETA back then was 8h. The console...

  7. chkdsk on boot cycling thru the same errors reporting fix over and over but never fix's ...

    in Windows 10 BSOD Crashes and Debugging
    chkdsk on boot cycling thru the same errors reporting fix over and over but never fix's ...: Greetings all!I run chkdsk c: /r over ... and over .. and over ... on each boot but it never gets to no errors found?It seems like it displays the same numbers on the screen on each attempt.is there anything else that can fix this?I and running in VMware 15.5 virtual disk...

  8. chkdsk left overs

    in Windows 10 Network and Sharing
    chkdsk left overs: Hello --- I had a problem with one of my drives so I rand chkdsk to correct the issues --- it completed ok, fix the problem, but after a closer look, I found found.xxx folder. the files in these folders were old and the most part were just leftover so I deleted...

  9. CHKDSK ETA 999 Hours - should I worry about something?

    in Windows 10 Ask Insider
    CHKDSK ETA 999 Hours - should I worry about something?: My HDD is failing and I often get Blue Screen of Deaths. I decided to run chkdsk on reboot with the command chkdsk D: /r. I backed up any important information so they sre in a safe place (I hope I backed up everything). So on reboot chkdsk started, it's currently saying...

  10. Robocopy and /ETA switch

    in Windows 10 Support
    Robocopy and /ETA switch: I have a few batch scripts to backup or restore files, and for some of them, I have the /ETA switch in them as they will move some larger files. In W7, It would always give the time to transfer, but in Win10 (x64), this switch doesn't seem to do anything. When I do Robocopy...