Windows 10: CMD window flashes for a 1/4 second and is gone. Prevents sleep.

I have spent 2 months trying to resove a problem.The issue... A cmd window opens and closes so fast its more like a flicker. It always opens on top of other programs. It prevent the computer from going into sleep.What I have tried so far... Nothing has fixed the issue.I have scanned the disc for issues.I have scanned the computer for virusesI have used a bootable virus scanner to scan the drive.I have stopped every start up programI have removed all extra hardware like a web camI have removed all hardware not needed and removed driversI have stopped almost every service not essential to window

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Surface Pro 4 screen not turn on after sleep

Hi, thank you. I could restart my surface pro 4 but still could not fix the Surface Pro 4 screen not turn on after sleep. I am still looking forward to hearing more suggestions to fix the black screen after sleep.