Windows 10: CMDCommand Prompt Flashes on and disappears quickly when windows 10 is booted up.

I've had a laptop that was giving to me a couple of years ago and notice once I linked my Microsoft account a CMD came on and disappeared in an instant. I could not make out what was on the CMD to help me figure what system was initiated. I asked the person that gave me the laptop where they purchased said laptop and was told they bought it at a shopping mall third party. I'm thinking the windows 10 pro activation key is bootleg and when I build my Desktop and logged into Microsoft it also began to happen to my desktop and when I entered the new activation key that I bought from a retailer it changed from Windows 10 PRO to Windows 10. what I'm asking is if my account is hacked? and if there is a way to remove the bootleg Windows 10 pro activation or is that laptop forever compromised.

:)

 

The prompt to allow Run Add On quickly flashes on the screen and disappears on Windows 10

Original title: ActiveX Control - view to allow

The prompt to allow Run Add On quickly flashes on the screen and disappears. How do I get it to stay on the screen so I can select it?

 

Installation media boots to command prompt

I've just booted from known working install media to see exactly what it does when booting. The sequence of events is...

1. Windows logo on a black screen
2. circling dots appear beneath the logo
3. light blue 'Please wait' screen with circling dots
4. a command prompt window (very briefly)
5. the initial Setup page appears

Do you see steps 1-3? If so, it appears you have stopped at step 4, suggesting that something on the disc cannot be read.

Does the disc boot properly in another machine? If so, try cleaning the laptop's drive lens then try booting from the disc again.

If not, make new install media with Microsoft's Media Creation Tool, either as a bootable USB, on an ISO that you can burn to another disc. At Step 8 in Option One of this tutorial you can choose between making a USB or an ISO.

Download Windows 10 ISO File

 

5870 Not Flashing

I had the exact same error and this is how i fixed it
--------------------------------------------------------------------------------

If you have been suffering messages such as 'Adapter not Found' , 'ERROR 0FL01' , 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.

--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsupport...reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416...FILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads...sh 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/i...ace=&memSize=0

------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool

Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)

Step 3 Copy ATIFlash files USB Boot Drive

Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)

Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)

Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)

Step 2 Reboot into your Mobo's Bios

Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot

Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist

Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked

Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed

Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC

Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------