Windows 10: COM port is not getting detected in the Mobaxterm even though all the drivers are updated...

I have tried installing the driver Prolific-USB-to-Serial-Controller-Driver_24HNN_WIN64_5.2.3.2_A00_03 3. Still the issue has not resolved.

:)

 

My Seagate external hard drive is not detected when plugged in to USB port of my laptop using windows 10?

Hello Lingam,

As you are facing issues with accessing hard drive on your computer, we will help you with this issue.

Do let us know the following to assist you better:

• Have you made any changes to the operating system prior to this issue?
• What is the complete error message/ error code while trying to access the hard drive?
  

Step 1: As a workaround, I suggest you to do the following to detect the issue:

• Connect the hard drive to different port and check if the issue persists.
• Connect different hard drive to the same port and check.
• Connect different hard drives to different ports and check.

Step 2: If the device is not detected on your computer try to run
Hardware and Devices troubleshooter as it checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the Hardware and Device
  Troubleshooter

Step 3: I suggest you to check if there are any drivers with yellow exclamatory mark in the Device Manager.

• Press Windows + X from the keyboard, click on
  Device Manager.
• Right click on the detected driver, click on Properties
  and check the device status.
  

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.

 

My Seagate external hard drive is not detected when plugged in to USB port of my laptop using windows 10?

Thanks for your response.

I have tried all the steps provided, however in vain. The external hard drive is not identified at all in any of the the USB ports when connected. The USB ports identify other external Flash drives and devices. However this drive is detected in another laptop
using Windows 7 OS. Please advise further.

Regards

 

Intel E5200 Gets Updated, R0 Stepping Coming Up

Intel's Pentium Dual-Core E5200 processor is getting on course for a specifications update. The chip will feature in a new, improved Wolfdale-2M core, spec'd out as the R0 stepping, from its current M0 stepping. The new stepping is intended to add new instructions, power-management features, and bring about changes in the chip-package. A short list of known changes is as follows:

• CPUID changed from 10677 to 1067A
• Power State Indicator (PSI) support with Intel 4 series chipsets
• New instructions - XSAVE and XRSTOR
• New S-spec and MM numbers
• New halide-free chip package

Due to the changed CPUID, users may require BIOS updates to detect the CPU. According to the company, E5200 R0 should be out by April 13.

Source: TechConnect Magazine