Windows 10: Common mistake

Unfortunately I put D:\ instead of D:\Downloads. How can I fix this Problem?? Should I reinstall the window?

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Is there any way that I can bypass the password requirement when it is in the 'lockscreen' mode?

Hello,

Kindly let us know what exactly happens after performing above steps.

• Do you still get a prompt to enter the login password?
• Did you perform the above steps without any mistake?

I would suggest you to restart your system once and then try to perform above steps and check.

Please get back to us with the above information in order to assist you accordingly.

Thank You.

 

Windows Shell Common Dll has stopped working

Hi Thomas,

A DLL file contains data and sets of functions that other programs in Windows use on a daily basis. The
Windows Shell Common DLL is not responding error indicates that the Windows Shell Common DLL has crashed due to some error. Usually, Windows will crash after attempting to make changes in the configurations of the audio devices or recording
devices.

To resolve the issue, we suggest that you install appropriate audio drivers. Incompatible audio device drivers are known to operate against the method that Windows 10 follows. Make sure that you are using a stable version of drivers instead of any Beta version.
You can download earlier version of the drivers for your operating system from the computer model manufacturer’s website and install it through Device Manager.

If the issue persists, install the driver in compatibility mode. You may refer to the steps below:

• Right-click on the driver and select Properties.
• Select Compatibility tab.
• Place a check mark next to Run this program in Compatibility mode and select the operating system accordingly from the drop-down list.
• Let the driver install and then check the functionality.

Let us know how it goes.