Windows 10: Computer always starting in recovery mode, and pressing ESC to go to the bios screen always...

Computer: Acer Nitro 5, started with w10, and upgraded to w11. Changed the bootloader from HDD to SSD, no problems.A while back my computer ran into some problem, most likely with some file I downloaded, and my computer was stuck in recovery mode. I went to the Acer and Windows help chats, both said to reinstall Windows 11. So that's what I did. I chose to keep my files, but the thing is, it was still stuck. The only thing I could do was to delete everything, as I had no knowledge of how to take files out of my SSD, and did not want to for fear of corrupting everything anyways.After wiping all

:)

 

After Windows 10 update, PC con't start

Good news, pc is back and running.
zBook was on the right track in that the BIOS was corrupted. However, the solution suggested did not work.
Fortunately, after considerable digging, I found some information on the Gigabyte site. Following their suggestions, I was able to restore the primary BIOS from the backup BIOS. The whole process took less than 10 minutes.
Basically, I had to:

1. Shut off the computer. Unplug all connections to the motherboard except the VGA/DVI output and the keyboard.
2. Press the POWER button and HOLD it. The computer will start and then shutdown. After the shutdown, release the POWER button.
3. Press and release the POWER button. The BIOS will go into recovery mode. A BIOS recovery screen will appear and you need only to select from the options that are presented.

This was a simple solution and I am now up and running.
Thanks to all who provided suggestions.

 

How do I get a screenshot of start menu?

1. Run snipping tool ( If screen appears grayed out, press ESC, if not continue step 2.)
2. Click to open the start menu
3. Hold CTRL and press print Screen. Screen will appear grayed out, ready to capture.

NOTE: This will work with all popup menus ie. Windows Menu, Context menu etc...

 

Cannot Enter Safe Mode / Computer boots normally

I'm running Win 10 Pro 1903.

Here are the steps I have taken to get into safe mode: Start button, settings, update and security, recovery, advanced startup, troubleshoot, advanced options, startup settings, restart. The computer boots normally, not in safe mode. Any suggestions would be most helpful. Thanks in advance for your help and interest. .