Windows 10: Computer Blue screenstop codeCLOCK_watchdog_timeout

HiMy computer usually ran into a problem with stop codeCLOCK_watchdog_timeout.Here are some event error log information:Initialization failed because the driver device could not be created. Use the string "025041000001" to identify the interface for which initialization failed. It represents the MAC address of the failed interface or the Globally Unique Interface Identifier GUID if NetBT

:)

 

Computer Freezes Then Blue Screen

Hello,

A stop error (also called a "blue screen" error) can occur if a problem causes your PC to shut down or restart unexpectedly. These errors can be caused by both hardware and software issues.

For us to better assist you, we'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

• Press Windows key + R, then type in winver.
• Click OK.

• Were there any recent changes made prior to this issue?
• What is the make and model of your device?

Meanwhile, we suggest performing the steps on this article
on how to troubleshoot blue screen errors on Windows 10.

We look forward to your response.

Regards.

 

Blue Screen

Hi,





Blue screens could be caused by problems with your computer’s hardware or with its driver. Still, we
would like to know more about the issue. Please clarify the following:

• Did you get a STOP code?
• Did you install any hardware or driver recently?

For basic troubleshooting steps to resolve blue screen errors, we suggest checking out this
article and simply follow the steps.



Feel free to contact us if you need further help.

 

Frequent Blue Screen error on computer

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are receiving Blue Screen error on your computer. I’ll certainly assist you with this.



However, please let us know:

• 
  When exactly are you getting the Blue Screen error?
  
• 
  What is the error message you receive?
  
• 
  Are you aware of any changes made to the computer recently?
  
• 
  What is the make and model of the computer?
  

I have analyzed the dump files shared by you and found that the error is caused by a Memory corruption.



I would suggest you to run a Windows Memory Diagnostic check on the computer to check test the memory installed on the computer. Refer the steps
mentioned below:

1. 
   Press
   Windows key + R, to open Run dialog box.
   
2. 
   Type
   mdsched and click on OK.
   
3. 
   Click on
   Restart now and check for problems.
   

Also, if you are using two RAM sticks, I would suggest you to using one RAM stick and see if that helps.



Let us know how it goes.



Regards,

Nikhar Khare

Microsoft Community - Moderator