Windows 10: Computer Bluescreens frequently after turning on after sleep, extremely poor preformance in...

First I would like to declare my current hardware:i5-12600K, overclockedMSI MPG Z690 DDR4 Edge Wi-FiCorsair Vengeance RS DDR4-3600, 32GB formerly DDR4-3000Asus TUF RX 6800 XT formerly 2070 SuperWD SN850 500GB SSDWD 3.5 HDD 2TBIssues began to arise after I had swapped out my ram kit from a Corsair Vengeance RGB Pro DDR4-3000, 16GB to be able to play Microsoft flight simulator, however, this caused frame stuttering in all games that is very noticeable and makes said games unplayable, it also causes reduced maximum FPS. On top of this, the computer started bluescreening after a while, aroun

:)

 

Computer Randomly Turns on From Sleep

I only saw this thread now, otherwise I would have suggested this sooner.
I had that same problem you are having, my computer was waking-up from S3 and the culprit was my X7 mouse.
powercfg -lastwake also listed the HID keyboard device which was an extension of the mouse.
Besides going in device manager and setting everything to not being able to wake-up the computer from S3, I also did this to the power profiles:



Worked for me.

 

Computer Sleep Option Missing in Settings

The Settings Power and Sleep menu in Settings should list Screen and Sleep, where Sleep is used to tell when the PC goes to sleep. Sleep is missing, so my computer never sleeps. Fast startup and Hibernate are not enabled.

I used Tutorial Add or Remove Sleep in Power menu in Windows 10 to change the registry while in administrative mode, but sleep still is not seen.


HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FlyoutMenuSettings now lists :1: It was 0 before the change.






I cannot get a large image, so will type
Default REG_SZ (value not set)
ShowHibernate REG_DWORD 0X00000000 (0)
ShowLockOption REG_DWORD 0X00000000 (1)
ShowLockOption REG_DWORD 0X00000000 (1)

I used Option 3 to add sleep using the Group Policy Editor. The steps seemed to work fine, but sleep is still missing.

I’m using a “new” refurbished Dell T3500 workstation with mbr running the current version of win10. I have a number of these computers, and the other all have the normal sleep mode .

Any suggestions? Jim

 

Windows 10 Upgrade 1903 64 bit Sleep Wakes Up on Multiple Computers

Someone suggested I look at all the drivers list before and after the upgrade. I did, nothing found/changed in drivers.

What I did discover was that after the KB4503327 upgrade, if I put the computer to sleep mode (via power menu,) I discovered the computer wakes up after the minutes set in the "turn off screen".
So, if the screen shutoff were five minutes and I put the computer to sleep, it would wake up after that amount of time, then turn the screens off after another time period of five minutes.

At this point, I have set the screen turn-off to "never" and any other sleep mode to "never".
Then, when I put the computer to sleep, it stays asleep.

This issue was never seen until this OS upgrade was installed in the system.

My next step is to upgrade the video adapter (something from 2007) to a new and different model adapter to see if that corrects this issue, or not. For now, my work-around is to set "never" in "sleep mode".