Windows 10: Computer Bluescreens frequently after turning on after sleep, extremely poor preformance in...

First I would like to declare my current hardware:i5-12600K, overclockedMSI MPG Z690 DDR4 Edge Wi-FiCorsair Vengeance RS DDR4-3600, 32GB formerly DDR4-3000Asus TUF RX 6800 XT formerly 2070 SuperWD SN850 500GB SSDWD 3.5 HDD 2TBIssues began to arise after I had swapped out my ram kit from a Corsair Vengeance RGB Pro DDR4-3000, 16GB to be able to play Microsoft flight simulator, however, this caused frame stuttering in all games that is very noticeable and makes said games unplayable, it also causes reduced maximum FPS. On top of this, the computer started bluescreening after a while, aroun

:)

 

Computer Bluescreens frequently after turning on after sleep, extremely poor preformance in games.

First I would like to declare my current hardware:
i5-12600K, overclocked

MSI MPG Z690 DDR4 Edge Wi-Fi

Corsair Vengeance RS DDR4-3600, 32GB (formerly DDR4-3000)

Asus TUF RX 6800 XT (formerly 2070 Super)

WD SN850 500GB SSD

WD 3.5 HDD 2TB

Issues began to arise after I had swapped out my ram kit from a (Corsair Vengeance RGB Pro DDR4-3000, 16GB) to be able to play Microsoft flight simulator, however, this caused frame stuttering in all games that is very noticeable and makes said games unplayable, it also causes reduced maximum FPS. On top of this, the computer started bluescreening after a while, around once every day, with system applications such as task manager and device manager opening much more slowly than before. The first ever bluescreen code was KMODE_EXCEPTION_NOT_HANDLED, which I had googled and tried many troubleshooting methods on. However, the system would bluescreen yet again with the same symptoms, however, with a different code; IRQL_NOT_LESS_OR_EQUAL. This process was repeated SYSTEM_SERVICE_EXCEPTION, and SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION, with BSOD usually occurring shortly after the pc is being turned on after a period of being asleep.

Solutions I've tried include but are not limited to:

1. Shutting down, and restarting my computer
2. Clean booting the computer
3. Underclocking the RAM to 3200
4. Un-overclocking my CPU
5. Running Scan tests and system repair commands using the Command prompt
6. Scanning my memory modules with MemTest86+ (Passed)
7. Turning off Anti-virus
8. Preforming a full system scan for viruses

9. Updating all drivers

10. Preforming a windows factory reset

11. Running and SSD diagnostic scan

12. Reseating DRAM and cleaning gold connectors

13. Reseating GPU and cleaning gold connectors

My computer was also having blacksreen issues, but I fixed that with the newes AMD graphics drivers.

Thank you in advance,

Zach.

 

Computer Randomly Turns on From Sleep

I only saw this thread now, otherwise I would have suggested this sooner.
I had that same problem you are having, my computer was waking-up from S3 and the culprit was my X7 mouse.
powercfg -lastwake also listed the HID keyboard device which was an extension of the mouse.
Besides going in device manager and setting everything to not being able to wake-up the computer from S3, I also did this to the power profiles:



Worked for me.

 

Computer Sleep Option Missing in Settings

The Settings Power and Sleep menu in Settings should list Screen and Sleep, where Sleep is used to tell when the PC goes to sleep. Sleep is missing, so my computer never sleeps. Fast startup and Hibernate are not enabled.

I used Tutorial Add or Remove Sleep in Power menu in Windows 10 to change the registry while in administrative mode, but sleep still is not seen.


HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FlyoutMenuSettings now lists :1: It was 0 before the change.






I cannot get a large image, so will type
Default REG_SZ (value not set)
ShowHibernate REG_DWORD 0X00000000 (0)
ShowLockOption REG_DWORD 0X00000000 (1)
ShowLockOption REG_DWORD 0X00000000 (1)

I used Option 3 to add sleep using the Group Policy Editor. The steps seemed to work fine, but sleep is still missing.

I’m using a “new” refurbished Dell T3500 workstation with mbr running the current version of win10. I have a number of these computers, and the other all have the normal sleep mode .

Any suggestions? Jim