Windows 10: Computer crashes after install of any Wi-Fi card?

I have a motherboard with Wi-Fi built in and I wanted to try and get faster download speeds so I bought a Wi-Fi card. I tried an off-brand one off of amazon as well as an ASUS PCE-AX3000, both of which will cause my pc to bluescreen before it can start up if they are installed. After checking my dumps I found that the error I was getting was SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M, and the driver causing it was Netwtw10.sys. I don't want to do anything without some guidance as the first time I tried this, somehow all of my HDDs and SSDs got corrupted.Device name DESKTOP-LGD48BQ Processor AMD Ryz

:)

 

Windows 10 and no wi-fi

Hi Joachim,

Thank you for posting your query in Microsoft Community. Appreciate your interest in using Windows 10.

I would suggest you to follow the methods below:

Method 1: Run the Hardware and Device troubleshooter by following the steps below:

• Click on the Start button, and type “Troubleshooting” on the search bar.
• Click on troubleshooting, then click on “Hardware and sound”.
• Under Hardware and sound, click on “hardware and devices”.
• A pop-up will appear, click on the “Next” button and your hardware troubleshooting will start.

Method 2: The issue may occur if the drivers for Wi-fi are not installed or updated. I suggest you to install/update the latest version for Wi-fi drivers by following the steps below.

• Press ‘windows key + R’ and type ‘devmgmt.msc’ and press Enter.
• Expand ‘Network adapter’ and right click on Wi-fi driver and select update.

Hope the information is helpful. Feel free to
write to us for any other assistance with Windows, we’ll be glad to assist you.

 

Trouble Changing Wi-Fi Password


I've been following the following steps to change my Wi-Fi password for some time:

1. Launch Control Panel.
2. Click "Network and Internet."
3. Click "Network and Sharing Center."
4. Click "Wi-Fi...."
5. Click "Wireless Properties."
6. Click the Security tab.
7. Check "Show characters."
8. Enter the password in "Network security key."

Those steps have been working just fine, but today I discovered a new wrinkle. If I change the password inside the router first, "Wi-Fi..." doesn't appear in step 4. This isn't much of a problem at home, because I can just change the password in Control Panel before I change it inside the router, but it would be a problem at a public hotspot, or something of that nature. I also tested Brink's instructions in "How to Connect To a Wireless Network in Windows 10," but they don't work for me either. How can I fix this?

 

wi fi not working on windows 10

Hi,

Thank you for posting your query in Microsoft Community. Appreciate your interest in using Windows 10.

I would suggest you to follow the methods below:

Method 1: Run the Hardware and Device troubleshooter by following the steps below:

• Click on the Start button, and type “Troubleshooting” on the search bar.
• Under Hardware and sound, click on “hardware and devices”.
• A pop-up will appear, click on the “Next” button and your hardware troubleshooting will start.

Method 2: The issue may occur if the drivers for Wi-fi are not installed or updated. I suggest you to install/update the latest version for Wi-fi drivers by following the steps below.

• Press ‘windows key + R’ and type ‘devmgmt.msc’ and press Enter.
• Expand ‘Network adapter’ and right click on Wi-fi driver and select update.

Hope the information is helpful. Feel free to
write to us for any other assistance with Windows, we’ll be glad to assist you.