Windows 10: Computer doesn't wake up from sleep

My Lenovo IdeaPad 3 with pre-installed Windows 11 has a real problem: if it goes to sleep, it doesn't wake up. I've had this laptop for a few months, and the issue has remained the same. When the computer goes to sleep either manually or by itself, it doesn't wake up despite my clicking and pressing the power button. The power light shows the laptop is on, and the fans are running quite hard, but the display doesn't turn on. I have to force shut down the computer every time, which is quite a problem. Sometimes, the laptop does indeed wake up, but I have found no correlation whatsoever to find

:)

 

computer wake-up after sleep

Hi Bill,

There's a possibility that the settings that enables your Space bar to wake your computer up from sleep was reset after updating Windows. If this what had happened, we suggest that you just re-set it up. See the steps below on how to do
so:

• Press Windows key and type keyboard in.
• Click on Keyboard option and a pop-up windows should show up.
• From there, go to > Hardware tab > Properties >
  Change settings > Power management > Allow this device to wake the computer >
  OK/Apply.

Try the if the steps did work and let us know any updates.

 

wake from sleep issue in windows 10

Hi,

Thank you for posting your reply. Apologize for the delay in response.

I suggest you to check which devices are configured to wake up the computer from sleep by following the steps below:

• Right click on Start icon and select Command Prompt (Admin).
• Type the command line below:

Powercfg /devicequery wake_armed

3. Check if the devices (Keyboard, Mouse, Ethernet cable) are listed.

If the system is not going to sleep and going to Hybernate, the only option to wake up is to press the Power button.

Hope the information is helpful.

 

computer wake-up after sleep

Did all the steps exactly as shown above and "Allow this device to wake the computer" was already selected.

I think you might have miss-understood the problem. It appears that the computer is waking up, but it doesn't re-connect to my display. I have to turn off the display and turn it back on to get my display to to re-connect. This was not a problem prior to
the last Win 10 upgrade.