Windows 10: Computer fails to boot windows and reset this pc does not work need help to fix this.

Hi so basically my computer is just not booting so I decided to have a fresh install of windows put. The only problem is it gives me "There was a problem resetting your PC. No changes were made. Not much I can do as I cannot boot into windows and troubleshooting does not work. Would appreciate any help anyone can provide to help me fix this issue.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Windows 10 "Reset this PC" failed upon final boot.

Hi Cathy,

Failing to reset the PC may happen due to several reasons. To isolate your issue, kindly answer the following questions:

• Were you able to boot using the ISO file that you downloaded?
• What troubleshooting steps have you done so far?

When booting the PC using USB recovery tool, please make sure that the first boot source in your PC's BIOS is the USB drive and not the hard drive. It is best to re-download the ISO file to make sure that you have the latest version.

Keep us updated with the status of this concern and we'll be glad to assist you further.

 

Computers Vanished From File Explorer But Network Still Works

I agree with @Try3. I have tried every suggested method to fix Windows networking suggested on these forums. All at best only worked for a short time. The only things that helped was:

1. Batch file I suggested in an earlier post
2. Creating shortcuts to computers on my home network

Note these two things are not fixes but workaround. However, at least they help and have never failed. I have shortcuts set up for eight computers on my home network. I have created a folder on my desktop called My Network to hold the shortcuts. They have a mix of the following operating systems:

• Windows 10 - 4
• Windows 7 - 3
• Windows XP - 1