Windows 10: Computer Keep Crashing under Clock_Watchdog_Timeout as well as Machine_Check_Exception,

The former is more frequent but I am getting infuriated with the constant crashes I am receiving, below are the two most recent Minidumps, as of me creating the ticket, of both Clock_Watchdog_Timeout and Machine_Check_Exception respectively.Machine Check Exeption: ******************************************************************************** ** Bugcheck Analysis ** ************

:)

 

Custom build spits Machine_check_exceptions and Clock_watchdog_timeout


Two weeks ago I build a pc and from the start I've been trying to diognose what's wrong with it. It crashes at seemingly random times while running nothing special at all (steam, chrome, spotify, bittorrent). Most of them are Machine_Check_Exceptions, but sometimes it's also Clock_watchdog_timeouts.
At first I thought it was a driver problem. So, I used Driver Booster to download new drivers. That did not solve the problem and actually made the system very unstable. After that I did a format and just waited until windows started installing the drivers. This worked fine at first, but the same problems came back after a few days. I've updated the bios to the latest version and never done a OC on the machine. A few things that came to my attention while researching, but don't seem likely to be the problem are:

• When putting the thing together I bend one of the USB3.0 port pins. I have bend the pin back and inserted the cable into the port. The ports in question work well and send over data at speeds I would expect.
• The CPU cooler I've chosen is very heavy and could be installed improparely. This was one of the things I've found on wikipedia when researching this. However, the CPU runs idle around 35-40C ( 95-104F). I don't know what the temps are when the system crashes, though.
• I have run memtest86+ for 9h and it gave 0 errors

While writing this post (~30min), the system has had two Clock_watchdog_timeouts while being idle. Sometimes, the BDOS data collection gets stuck around the 60% mark.Attachment 61512

 

CLOCK_WATCHDOG_TIMEOUT after a fresh install

 

CLOCK_WATCHDOG_TIMEOUT After Leaving PC for 5-10 Minutes


Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

The 0x101(CLOCK_WATCHDOG_TIMEOUT) is mostly caused by BIOS or hardware problem, the challenge is to find software problems.
I suggest to update your BIOS.
Code:

Code:

BIOS Version:              American Megatrends Inc. 2001   , 7/8/2011

Attachment 51031