Windows 10: Computer keeps getting BSOD without error logs

Hello so I encountered a problem with my acer nitro 5 laptop. I would get a random BSOD with an error code of CRITICAL_PROCESS_DIED followed by a "No Bootable Device" prompt. After letting the laptop rest for a little bit it will boot up windows and shortly after i would encounter the same problem again. I opened bios to see if my SSD is being read by my system, and it wasn't. Sometimes the SSD will apear in the bios and sometimes it won't. I have reformatted my laptop many times and the result is still the same. Also, i have checked the System events which displays no BSOD related problems an

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

keep getting BSOD errors randomly

Hi,

Thank you for writing to Microsoft Community Forums.

I understand that you are getting BSOD error,
this can either be due to Faulty hardware, in order to get clarity and to assist you accordingly, we would need some information.

1. What is the version and build of you operating system? In the
   Search box, type
   winver to get this info.
2. Are you aware of any changes made on your computer before this issue occurred?
   
3. What is the make & model of the computer?
   
4. Does the computer boot to the desktop?
   

Suggest you to upload the mini dump files.

Refer this article How
to post crash dumps after Blue Screen of Death in Microsoft community.

I would suggest you to disconnect Non Essential External Hardware – Camera, Printer, Multiple Monitor’s etc.

Refer this article to Troubleshoot
blue screen errors.

Thanks,

Suman.B

Microsoft Community - Moderator