Windows 10: Computer loads up and I’m able to do stuff for 2 minutes then nothing.

This just started recently, my computer will load up and everything is fine for let’s say two minutes where I can click open files and stuff but then after that I can’t use anything that isn’t open. If the program isn’t open it won’t open after the first two minutes. Also if I’m in a browser and try to open a new tab it won’t open. It won’t allow me to open task manager, nothing responds. I can’t even shut my computer off unless it’s by the button. I tried to restore my pc to a couple days ago and it worked for 8 hours then it happened again.

:)

 

the sims 2 h&m fashion stuff tsupdo.exe stopped working

Hi,

I would suggest you uninstall the game completely and reinstall the game in compatibility mode and check if it helps.

Follow the steps below on how to install driver in compatibility mode:

1. Download the game from the manufacturer’s website and save it on your local disk.

2. Right click on the setup file of the driver and select “Properties”.

3. Select “Compatibility” Tab.

4. Place a check mark next to “Run this program in Compatibility mode” and select operating system from the drop down list.

5. Let the game install and then check the functionality.

Hope this information is helpful regarding the
install of Sims 2 h&m fashion stuff. Please do let us know if you need further assistance, we’ll be glad to assist you.

 

M.2 SSD not being able to boot from it, windows doesn't recognise.

Ok, this is what happened after all the comments and suggestions, @dude: Thanx for the video, my mb had non e of those settings, it had the raid/option memory gene or achi. Can only choose one or the other. @Saltgrass, my settings did point out auto and enabled the pcie x4, gen 3. I did an bios flash as suggested, because my bios was not the latest version, after a reformat the m.2 was picked up, still cant install OS onto it as it states legacy not found, removed my dvd rom from the sata port to another, and the drive was found and installed. Only issue now is that it's still not my OS drive but it at least now works and is installed, but on the Intel rst drive the obtain memory gene option to enable is greyed out, and shows as disabled. However the program lists the M.2 and it is working 100%,. I installed overwhatch onto it, it performs perfectly. But will update the intel driver tonight and see if that makes any difference. Seems the bios flash enabled the settings listed by @dude that was not present pre-flash.

So the m.2 drive works. I can game off it and install omnto it. Can not install windows on it, gene memmory is enabled, pcie x4 is on and on auto detect, Motherbaord lists all the drives connected, motherboard ahs been updated to latest bios. After flash new settings became available, m.2 is now on memmory gene enabled not achi, windows os is enabled and fast boost is enabled, intel rst is installed and lists all the ssds and the m.2, however the m.2 on memmory gene is dissabled and the option to enable is greyed out. Will update the driver as Essenbe suggested of the m.2 and see if anything changes. Thank you all for the help, I can now atleast use my m.2

 

No Boot, Drives Not detected, Can't Load Win10 Pleses Help!

Until the BIOS sees your M.2, there's nothing you can do. It does not matter if the M.2 is unformatted/unallocated, the BIOS should see it.

1. Suggest that you take the M.2 out, clean all the contacts and re-seat it and hope this is the case.
2. If step one fails. Connect your 250GB SSD back in using one of the SATA port to see if the BIOS recognize it. If it doen't, then it might be something wrong with the MB, if it does then boot up the Windows Installation USB, run diskpart, shrink it at least 40GB then create a partition, Leave it unallocated then install Windows there.

Also try to re-seat all other components such as Memory, Video card etc...