Windows 10: Computer recently has been getting the BSOD

My computer has recently been freezing and getting the BSOD with the error code being "DPCWATCHDOD VIOLATION". My computer has been generating mindumps so i will send them here. https://drive.google.com/drive/folders/1m8C1BrwHIt1YjmIVNrKGU1iT18vHmNTI?usp=sharing

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD on new computer while gaming

I just got a new computer about a month ago. Everything is new and I get BSOD (windows 10) while gaming mostly although it sometimes happens while I'm just using the computer. Sometimes the computer doesn't BSOD and just gives me a Access Violation Error. Not sure if related.

Here is the link to download output files from the V2 script.

Dropbox - windows crash - Simplify your life

Any help is appreciated

Steps I have taken:

• Updated all drivers and bios to latest versions

• Checked ram with windows memory test to see if ram is faulty. (A stick was and it was removed waiting for replacement)

• Clean Installed Windows after finding faulty ram

• I had 2 x 2080Ti installed, I removed one, tested and then swapped cards; issue still exist

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.