Windows 10: Computer restarting weekly in a sudden fashion without BSOD

Requesting help regaring some radom restarts without any BSOD. They happen weekly, and occcur during light tasks web-browsing.Its a brand new ASUS laptop 515UA.Here are the associated events: .csv: https://drive.google.com/file/d/12m-6qvkj-IubX2pN6sDOw4O1PzWQxysc/view?usp=share_link.evtx: https://drive.google.com/file/d/1K0z-NapNE06DOSDbJhYg8agwHVt9sZbM/view?usp=share_linkRan a full DISM/SFC scans as administrator, found some errors that were sucessfully corrected and then restarted. The problem still persisted. All drivers and BIOS are up to date with myAsus utility.Could it be hardware iss

:)

 

Random restarts

when you start the computer up press F8 repeatedly until you get a list of how to start windows, choose do not automatically restart on system failure. if your getting bsod's list what your getting here so we can further help you. IF the system is not getting bsod's and still restarting as you say then i would look into getting a line conditioner for your computer as you might be having power issues.

 

Computer restarting

I took out one of the sticks and it's working now. RAM wasn't on my list cause I thought bad ram would give BSODs not restarts. Boy was I wrong! Thanks for the help i789.


EDIT: I ran the Windows 7 memory stability test on the remaining stick and it passed the test. Half an hour later the comp crashed again. Is it still the RAM?

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.