Windows 10: computer screen not turn on

when i use SendMessageHWND_BROADCASTWM_SYSCOMMANDSC_MONITORPOWER0x0002 to turn off screen, quickly to move mouse,it will turn on, but it not operate for a long time when i move mouse again screen not turn on,computer is not in sleepchecked byowercfg /sprpowercfg /a out put S3i print a log WM_SYSCOMMAND "GUID_CONSOLE_DISPLAY_STATE" it show turn,but i can not see screen on

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Unable to turn off On screen keyboard on Windows 10.

Hi,

To assist you better, I would like to know the current build installed on the computer and the troubleshooting step that you had already performed.

As an initial troubleshooting step, try to turn off the OSK by following the below steps:

• Select “Start” and select “Settings“.
• Choose “Ease of Access“.
• Select “Keyboard“.
• Set “On-Screen Keyboard” to “On” or “Off” as desired.

If the issue still persists, I suggest you to download and install any pending updates that needs to be installed on the computer through Windows update and check if it helps to resolve the issue.

Hope the information helps. Let us know if you need further assistance. We will be happy to help.

Thank you.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??