Windows 10: Computer showing ghost display as Display 1. And my connected monitor as the Display 2

Hello,I have an issue where my connected monitor is displayed as display 2:And a "Ghost display" that i can't even see or control is shown as display 1Now when I boot or update the pc I can only see the rendered screen when windows has been loaded.This also means I cannot go into my bios or do anything before windows has loaded. I am trying to reset my pc but I can't since there is no way for me to interface with the computer before the windows boot.Now I am connected through an VGA port on my motherboard. which is the only port working on my computer. The HDMI and DVI ports on the graphics ca

:)

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter
   

 

2 Monitor Display - Display 1 stuck on wrong monitor

I have a 2-monitor setup. As recently as yesterday (1/20/2020), the display settings had Display 1 on the left monitor (main display) and Display 2 on the right monitor. Today, Display 1 is on the right monitor regardless of how I configure the display settings.

In the top screenshot, in the image below, Display 1 is on the right and Display 2 is on the left in the display settings. This is consistent with the layout that 'Identify' ... identifies. In the bottom screenshot, the display settings show Display 1 on
the left and Display 2 on the right, however 'Identify' shows Display 1 on the right and Display 2 on the left.





For what it is worth, these screenshots are edited to be consistent with my monitor setup. When the display settings show Display 1 on the left and Display 2 on the right, both the cursor and a raw screenshot behave as if that is true.
However, Display 1 is stuck on the right monitor, so these screenshots show what I am seeing.

I have tried unplugging and re-plugging the monitors, uninstalling and re-installing the display drivers, and rebooting the computer. Nothing satisfactorily resolves my problem, which is that regardless of the display settings, Display 1 is stuck on the
right monitor. I could make Display 2 my main display and have that be on the left, which would
functionally make the setup do what I want, but would not resolve the actual problem of Display 1 being stuck on the right monitor. Since the displays were set how I wanted them yesterday, clearly something has changed, and I'd like to know what.

 

Display 1 not swappable with Display 2. Why?

Hi Raven,

You can choose from the list of monitors, which screen you want to make as your main display. To do so, please follow the steps below:

• Right-click on your desktop, then select Display settings.
• Under Customize your display, select which screen you want to make as the main display.
  
• Check Make this my main display, then click Apply.
  

Feel free to post back should you need further help.