Windows 10: Computer stuck on verifying DMI and crashes in BIOS

Hello, I've recently run into the problem of my computer getting stuck on verifying DMI on start up. I have looked online and they all seem to suggest I need to change something in BIOS, but I can't enter BIOS or Boot without it freezing completely. I cannot progress any further into the computer. I have not installed any new hardware into the computer recently, but I have tried taking my hard drive out and replacing it with another to see if that helps, however this seemed to make the problem worse until I put the previous one back in again.I'm aware this is likely a hardware problem, rather

:)

 

after updating windows 10 stuck non verifing dmi pool

after updating my computer is stuck on verifying dmi pool

 

Computer Won't Reboot - AMD Data Change...Updata New Data to DMI

If he is getting stuck at verifying DMI pool data, that means his BIOS isn't finishing the POST process before it's hanging up. Although I'm confused now because he said he tried re-installing windows which would indicate that the machine is getting through the entire POST process.

I'm confused now. I think we need a better, more descriptive version of what exactly is happening.

Maybe a full step by step process of what is happening?

 

Hanging at "Verifying DMI Pool Data" when booting

Hi,

Sorry for the inconvenience caused.

Try the below steps to resolve the issue.

Restart the computer and keep tapping the Function keys to enter into the BIOS. (Refer to the manual for the Function key to get into the BIOS)

Connect the USB drive.

Select the "Boot" tab.

Select 1 as "USB drive or USB HDD".



Then press the F key and select "Yes" to save the changes in BIOS.

Also refer to the post by Waseemulla and check.

Just upgraded to Windows 10: Stuck at Verifying DMI Pool Data

Hope this helps. Get back to us for further queries. We are happy to help!