Windows 10: Computer turned REALLY slow after unplugging cord from wall.

So my computer was pretty fast a few weeks ago but then i accidently pulled the cord from the wall while have a Fortnite open. I plugged it back in and when I had signed in and loaded up Fortnite, realizing my pc was slow. I had recognized this problem before as when I bought it had the same issue which im assuming was cause from the employees at the store I bought it from It pre-built causing the same problem. But after a few months the issue had just vanished. Now it back and I dont know what to do. I tried re-installing windows 11, restarting the PC, moving the cord to a different outlet,

:)

 

Computer turned REALLY SLOW after unplugging AC cord from wall (AC FROM POWER SUPPLY

I only suggested to unplug the hard drive while reinstalling Windows to the SSD.

 

Printing error code: 0x803C010B

Hi Jacqui,

Based on the troubleshooting steps that you have done and our research, the error is hardware-related. You can follow the steps below for additional troubleshooting:

• Do a power reset and check if the printer is plugged in firmly to the wall outlet to ensure that the equipment is receiving full power.

• Turn on the printer and disconnect the cord from the rear of the equipment.
• Next, unplug the power cord from the wall outlet and wait for 15 seconds.
• Plug the cord back to the wall outlet and connect the cord back to the equipment.
• The printer should automatically turn on. If not, press power button.

In the event that the power reset still does not resolve the issue, we recommend that you contact the manufacturer and ask for further assistance with your equipment.

Keep us posted.

 

Computer turned REALLY SLOW after unplugging AC cord from wall (AC FROM POWER SUPPLY

I had suggested to run Memtest overnight to really stress test the RAM.