Windows 10: Configuring Network Storage in Explorer after upgrade from win7

I have a LAN with 3 Pc's all running win7 connected. The LAN switch also connects the internet modem and 3 network attached stores for various data types (media, backups) that - because of the LAN - are independently accessible from any of the PC's. All of the NAS devices are mapped into windows explorer on each PC for ease of use: using standard copy and paste methods to get files from on-PC to NAS, or vice versa, just worked. But the NAS devices had to be visible to explorer on any PC when explorer opened for that to happen.

This topic revisits one I raised some months ago concerning configuring the LAN from a clean win10 install, and I abandoned the effort because the reply detail was simply inadequate to use, and follow up questions were not answered. Maybe the forum experts thought I was just dumb, but not answered. The further details below will explain that. I am hoping that this time there will be a more complete response, in detail.

Upgrading to windows 10 from 7
method 1 - the MS preferred way - an in-place upgrade on the desktop machine. This carried over all the NAS settings in windows explorer, and under win10, I could access the NAS devices as I previously had. The internet was also available.

HOWEVER altho win 10 ran, this method broke my video studio editing applications, and as I use these extensively, on a daily basis (apart from windows , the email package and a browser, the most used applications on the machine) this method wasn't acceptable.

method 2 - a clean install. I know from other Video Studio users that a clean install runs the video studio applications successfully. So I tried the clean install approach. And this method completely disconnected the upgraded PC from any of the network stores on the LAN. The internet via the LAN was available.

And in this condition, I could not, NOT find a way to configure the NAS stores so that they could be even seen by explorer, let alone function as mapped drives. Everything I tried had missing steps, questions about this or that went unanswered. But I know it can be done under win10 because the in-place upgrade method had it just right. So, not acceptable, reverted win7, where it all works fine.

Trying again: configuring networked storage under win10
Is there a detailed procedure for configuring a LAN-based network storage device so that it can operate as a mapped drive in windows explorer???

:)

 

Configuring Network Storage in Explorer after upgrade from win7

I have a LAN with 3 Pc's all running win7 connected. The LAN switch also connects the internet modem and 3 network attached stores for various data types (media, backups) that - because of the LAN - are independently accessible from any of the PC's. All of the NAS devices are mapped into windows explorer on each PC for ease of use: using standard copy and paste methods to get files from on-PC to NAS, or vice versa, just worked. But the NAS devices had to be visible to explorer on any PC when explorer opened for that to happen.

This topic revisits one I raised some months ago concerning configuring the LAN from a clean win10 install, and I abandoned the effort because the reply detail was simply inadequate to use, and follow up questions were not answered. Maybe the forum experts thought I was just dumb, but not answered. The further details below will explain that. I am hoping that this time there will be a more complete response, in detail.

Upgrading to windows 10 from 7
method 1 - the MS preferred way - an in-place upgrade on the desktop machine. This carried over all the NAS settings in windows explorer, and under win10, I could access the NAS devices as I previously had. The internet was also available.

HOWEVER altho win 10 ran, this method broke my video studio editing applications, and as I use these extensively, on a daily basis (apart from windows , the email package and a browser, the most used applications on the machine) this method wasn't acceptable.

method 2 - a clean install. I know from other Video Studio users that a clean install runs the video studio applications successfully. So I tried the clean install approach. And this method completely disconnected the upgraded PC from any of the network stores on the LAN. The internet via the LAN was available.

And in this condition, I could not, NOT find a way to configure the NAS stores so that they could be even seen by explorer, let alone function as mapped drives. Everything I tried had missing steps, questions about this or that went unanswered. But I know it can be done under win10 because the in-place upgrade method had it just right. So, not acceptable, reverted win7, where it all works fine.

Trying again: configuring networked storage under win10
Is there a detailed procedure for configuring a LAN-based network storage device so that it can operate as a mapped drive in windows explorer???

 

Set Broadband Internet Connection Network Configuration

Hi,

Upon analyzing the details you have provided, kindly run the
Network and Internet Troubleshooter
and check if there's any changes. To run the
troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting.
  
• 
  Choose
  Network and Internet.
  
• 
  Run the following
  Troubleshooter:
  
  • 
    Internet Connections.
    
  • 
    Network Adapter.
    
  • 
    Incoming Connections.
    

If the issue persists, we suggest that you try to
renew
your
IP address. To do this, follow these steps:

• 
  Open
  Command Prompt
  as
  Administrator.
  
• 
  Type the following command:
  
  • 
    Ipconfig/release
    and hit
    Enter.
    
  • 
    Ipconfig/renew
    and hit
    Enter.
    
  • 
    Exit.
    

Let us know how it goes.

Regards.

 

is there any demand for a system configurator?

Processor(V) <--drop down arrow
-AMD(V)
--Socket(V)
---AM2(V)
----List of cpu's
---939(V)
----List of CPU's
-Intel(V)
--Socket(V)
---775(V)
----List of cpu's
---771(V)
----List of CPU's


etc etc.