Windows 10: Connecting or pairing to Windows device via Bluetooth

None of my bluetooth devices can connect on my laptop. Can't use my Airpods Gen 2

:)

 

Bluetooth Stopped pairing

On Monday my wireless headphones were working ok, on Tuesday they weren't . When I switch them on now, I still get the 'connected' message, but they no longer show up in the list of connected devices. I've tried uninstalling and re-installing the Bluetooth adapter, re-installing the drivers, rolling back the drivers etc, and although i get the 'connected' and 'pairing' messages, they still don't appear on the list and are not working. Any suggestions, please? (There may have been an update installed on Monday night?) Windows 10 Pro. version 22H2. Build 19045.3930

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis

 

Bluetooth audio headset not recognized by Windows - won't pair/connect

Hi,

I've run into a problem recently with pairing my wireless Bose Soundsport headphones to my PC. Up until recently, the headphones paired and worked fine with my PC and iPhone simultaneously. I have 2 pairs of these exact headphones, and neither of them connect to this PC. However, they still connect to any other device.

The problem I am experiencing has persisted ever since I installed a graphics driver update via the GeForce Experience application (version 397.64, released on 05/09/2018). I updated this driver as a result of a few Memory_Management BSOD's and crashes while playing Fortnite.

Before anyone says, "Have you tried a troubleshooter / reinstall bluetooth drivers / make device discoverable / etc..." , please know that I've gone through the basic steps to solve problems like these. The only thing I haven't done is revert to a previous graphics driver - as I'd rather not do that. From a few hours of research, I haven't seen a problem similar to this.

What I Am Experiencing:
- I've paired and un-paired this device many times in the past. So I know the procedure.
- When I set the headphones to "Ready to Pair", the device name is expected to appear in the device list after clicking "Add Bluetooth or other device" in Windows Bluetooth settings.
- Instead, I only see an audio device called "Headphone" that, when clicked, will just say "Connecting..." indefinitely (see attached image).

In the past, the "Add Bluetooth or other device" would display the name of the device (Bose Soundsport), whereas now it only displays "Headphone". Why can my PC only see the headphones?