Windows 10: connecting two computers on the same home network

i have a windows 11 computer and a Windows 10 computer . the win10 computer has four external drives attached to it. i would like to be able to sit at my win11 computer and browse and edit the files on the exernal drives connected to my win10 computer , and also the "D" drive inside the Win 10 system a second internal hard drive. is there a cookbook recipe i can follow to achieve this end to end connectvity. i will NOT need to access the Win11 computer from the Win 10 computer. just the other way around 11 to connect/browse/edit the win 10 system. thanks for your thoughts/ideas. PS:

:)

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank
   
   
   

 

No network connection

Hello Graham,

To resolve your concern about wireless network issues, please click the link below and follow the suggested troubleshooting steps:

• Fix network connection issues in Windows 10

Let us know how it goes.

 

Losing network connection

Hello Dear, if you have a laptop or a PC with a wireless network adapter, you can see a list of available wireless networks and then connect to one of those networks. The wireless networks will only appear if your PC has a wireless network adapter installed, the adapter is turned on, and the wireless access point is in range.

1. Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.

2. In the left pane, under Network Tasks, click View available wireless networks.
In case, If you don't see the network you want to connect to, click Refresh network list. If you see the network but the signal is weak, move the PC closer to the wireless router.

3. Click the network you want to connect to, and then click Connect.

4. If you're connecting to a secure network, type the security key, and then click OK.

I Hope you solve out your query soon.