Windows 10: Connection Through Router to USB DISK

Presumably after some windows 11 updates, I cannot NOW get 3 of my computers to continue to get access to a USB Disk through my router. All things such as enabling SMB 1.0 etc have been checked. Have you any ideas about how I can get back things as they were.From the net I can see I am not the only one.Oh and why do you people do it. Since Windows 2000 it has only gone down hill.

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

wireless conection to router

Hi,

To better assist you, we would like to know the following information:

• Are you able to see the router's name in the wireless networks list?
• Are you able to connect to the router but unable to connect to the Internet?
• Do you receive any error message when connecting to the router? If yes, what is the exact error message that you receive?

In the meantime, we suggest that you run the Network troubleshooter. The Network troubleshooter can help diagnose and fix common connection problems. Kindly follow the steps below:

• In the search box on the taskbar, type Network troubleshooter, and then select
  Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that fixes the problem.

If the issue persists, kindly try the troubleshooting steps on the following link:

Fix network connection issues in Windows 10.

We recommend that you try the steps on the Update the network adapter driver,
Run the Network troubleshooter followed by networking commands,
Temporarily turn off firewalls and Use network reset to reinstall network devices sections.

Let us know how it goes for us to assist you further.

 

Unable connect to WEP Security Router

Hi,



Thank you for posting on Microsoft Community. We regret the inconvenience caused.



Before assisting further, I would like to ask you few questions:

• Do you get any error message when you try to connect to the network?
• Are you able to connect to other devices using similar router?

Method 1: If you are able to connect to other devices using the same router, i suggest you to run the troubleshooters by following the steps below:



Step 1: I suggest you to run the
internet connection troubleshooter by following the steps below and check if the issue is resolved.

• Press Windows icon key on the keyboard, type Troubleshooting and select the top most search result.
• Click on View all from the left side panel of the window.
• Select Internet Connections, click on
  Advanced and check Apply repairs automatically
  option.
• Follow the on screen instructions.

Step 2: Also run the network adapter troubleshooter by following the steps below and check if the issue is resolved.

• Press Windows icon key on the keyboard, type Troubleshooting and select the top most search result.
• Click on View all from the left side panel of the window.
• Select Network Adapter,
  click on Advanced and check Apply repairs automatically
  option.
• Follow the on screen instructions.

Method 2: If the issue persist, I suggest you to
update the network adapter driver from device manager by following the steps below:

• Press Windows key + X keys on the keyboard and click on
  Device Manager.
• Expand the Network adapter driver from the list.
• Right click on the driver and click on Update option.
• Restart the PC to install the network adapters automatically and check if the changes are effective.

Also check from the manufacturer’s website if you are using updated network adapter.



Write back to us with the answers to the above questions for further assistance. Your reply is important for us to ensure we assist you accordingly.



Thank you.