Windows 10: Consistent Errors Causing Shutdown, Crashes, Freezing, Hanging On my Device.

I purchased this laptop after a custom build pc i had built, Graphics Hardware shutdown in use and refused to start back up. Since then this laptop I had order which is an MSI Alpha 15 A4DEK has been giving me consistent blue screens, crashes, hangs, shutdowns, and freezes, during operation with or without any kind of load. It only runs consistently without crashing while in Safe Mode. Here are a few of the common critical errors i have received taken from my event viewer. After running multiple diagnostics scans such as chkdsk, sfc, and repairing the image. I receive these errors on near cons

:)

 

Win 10 hangs on restart and shutdown

No, that's rocket science. I'm posting with 10 already, so the problem was solved two days ago...Thank you.

The Windows 7 shutdown screen simply decided to hang and I finally did a hard shutdown and started it up again, after which it was painless.

 

Win 10 hangs on restart and shutdown

If your HP Pavilion has a fingerprint reader, you need to disable it. In my case fingerprint reader and system service for this device caused Windows 10 to hang on shutdown or restart (Blue screen with “Restarting” or “Shutting down” message and dots
circling around. After some time dots freeze and system hangs). I assume you have the same problem with Windows 10 and HP Pavilion.



To fix this issue after installing Windows 10 go to:

• 
  Computer Management > Device Manager
  

Find "Biometric devices" and disable "Validity Sensors (WBF) ....."

• 
  Computer Management > Services and Applications > Services
  

Find "Validity WBF Policy Service", disable this service and change "Startup type" in properties to "Disabled".



For the first time after this change system can hang up again. Turn off the computer (power switch) and turn on again. Now Windows should restart and shutdown properly.

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?