Windows 10: Constant Blue screen upon restarting and turning on my Laptop after update

I just restarted my laptop and chose to update it while restarting, and it constantly now gives me a blue screen. Even after all troubleshoot methods that were given on the Microsoft site, it would take me back the blue screen saying automatic repair. How could I please get my laptop to start working again?

:)

 

Failed BIOS update, Laptop keeps restarting.

Hello, I have an HP dv2050us laptop. I recently went to HP.com to update my drivers and software. When I got down to the Bios (WinFlash for HP Notebook System BIOS for Notebooks with Intel Processors - Microsoft Windows/Vista-Based version F.25), I downloaded it and installed it, when it got time to restart itself, my power turned off at my house and cut the power to the laptop.
My laptop turned off. After a minute when the power came back on I manually turned on my laptop. But all that happens is my laptop just keeps restarting itself. It loads up to the "Windows loading" screen, it will then flash a blue screen and restart all over again.

It's like my laptop goes in an endless loop of restarting, and it never makes it to windows. I tried the last known option in Safemode ('Windows advanced options menu') but it does not help or work. I have also tried getting into Safemode, but that doesn't work either.

I can press f10, and that gets me into the Phoenix BIOS Setup Utility. And pressing f8 gets me to 'Windows advanced options menu' also know as the "Safemode" screen
I have no idea how to fix this! Please help! Thank you.

 

Laptop loads to Windows 10 logo then blue screen and shuts off

shadowthefire,

What brand/model laptop is this?

Try the following:

Step 1: Make sure the computer is shut down, and press the Power Button to turn the computer on.

Step 2: As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off again.

Step 3: Repeat this process 2 or 3 times until you see the following on the screen: Preparing Automatic Repair
Let the computer boot to the Automatic Repair screen.

Step 4: The next screen (blue) goes to: Choose Account to continue
Select your account, enter your Password, and press: Continue

Step 5: A Diagnosing your PC screen appears, and it takes you to the screen for: Automatic Repair

Step 6: Here you can click Restart, or, Advanced Options
Step 6.1: Select: Restart

Allow the computer to go through the routine, and see if it solves the issue.

If the problem still exists, go back to Step 1 through Step 6.

Step 6.2: This time, click: Advanced Options

Step 7: In the Choose an Option screen, select: Troubleshoot

Step 8: At the next screen, select: Advanced Options

Step 9: Last, select: Startup Repair (Used for problems that keep Windows 10 from loading)

Please provide an update.

 

BSOD CONSTANT RESTART LOOP

Hi,

This issue might occur due to an old or corrupted graphics driver. Since you are experiencing a constant restart loop, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.