Windows 10: Constant BSOD and high Pitched Squeal when Freezing

hi there


recently my computer randomly freeze and BSOD ed when in use, tried to reseat my Memory and other things but the BSOD keeps on appearing.

my PSU is new and the RAM sticks is also new.


this is my minidumps file. the earlier freeze dont leave any minidumps but the last BSOD give a minidump files.


https://drive.google.com/file/d/1ns2amPOegkvRd93JwO3q0PYgX2EBRmYP/view?usp=sharing

:)

 

Black screen printing wingdings with high pitched tone.

Hello,

Black screen printing wingdings with high pitched tone can be due to outdated drivers. This can also be connected to hardware issue. For us to isolate and identify
if this is a hardware or software issue, we suggest to perform the Windows Hardware Troubleshooter.

To access the Hardware and Devices troubleshooter, follow the steps provided below:

• Type “Troubleshooting” in the Search bar and press Enter.
  
• Click on “View All” in the top left corner.
  
• This will display the list of troubleshooters which are built-in in the computer. You can click on Hardware and Devices from the list and you can run the troubleshooter.
  

Let us know if that worked out for you.

 

High pitched squeeking when mic is unmuted?

It's called feedback.

Turn the MIC volume slider in the windows recording settings all the way down to 0 but DON'T mute the MIC in windows.

Then turn the MIC ON (Un-mute the MIC) on the controller on the cable, and slowly slide the MIC volume slider UP in the windows recording settings until you can hear input from the MIC, but not so high as it begins to squeal again.

If that does not work - try covering the MIC with your hand whilst it is making the squealing noise - if this does change the pitch/tone/volume of the squealing then you are still getting feedback , if the pitch/tone/volume of the squeal remains constant even when covering the MIC with your hand - you may have a broken MIC/MIC Cable/MIC Connectors.

 

High pitched squeeking when mic is unmuted?

Hello mate, many thanks for the reply.

I know what feedback is, but this is literally constant BEEEEEEEEEEEP when the microphone is plugged in, but non existent when muted. I tried what you said, slowly increasing the mic volume, but anything over 1 and you can hear the beep. So, i guess its a broken jack? Great, just got these from the missus for Xmas.