Windows 10: Constant BSOD Loop Page_Fault_In_Nonpaged_Area

Hello, recently I've been getting this BSOD error code constantly this month, and can often get into a BSOD death loop with no real reason as to why. Finding out the code is a broad issue, I've even reinstalled Windows as a whole, only for the BSOD to come up again. Was starting to think it's a hardware Issue and used BlueScreenView to see what's going on. I see the same two culprits: tcpip.sys and ntoskrnl.exeI've used SFC /scannow to fix any corrupt files and it seems the corrupt file is always "bthmodem.sys" so I'm attempting to install a third party driver that the bluetooth dongle belongs

:)

 

BSOD CONSTANT RESTART LOOP

Hi,

This issue might occur due to an old or corrupted graphics driver. Since you are experiencing a constant restart loop, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.

 

BSOD problems IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA

Some days when I turn off my PC it happens sequentially these 3 BSOD (IRQL_NOT_LESS_OR_EQUAL + MEMORY_MANAGEMENT + PAGE_FAULT_IN_NONPAGED_AREA). Not necessarily in this order. But the errors are basically one of these.

• I've already done memtest86 and got no errors
  
• SFC /scannow with no errors too
  
• checkdisk with no errors
  

I've checked the error with BlueScreenView and the problem is with the driver ntoskrnl.exe.

Any suggestion of whats going on?

 

Blue Screen Error PAGE_FAULT_IN_NONPAGED_AREA in constant loop

Hi

For the past 3 days, when I turn on my laptop, It will display the Windows 10 logo and load for a few seconds and then the screen will flash to a BSOD (Blue Screen Of Death) With the following text.



Your PC ran into a problem and needs to restart. We'll restart it for you .

If you'd like to know more,you can search online later for this error: PAGE_FAULT_IN_NONPAGED_AREA (iaStor.sys)

It will then go back to the Windows 10 logo with the text ("Preparing Automatic Repair") only to go back to the exact same BSOD as before. It will continually loop like this until it runs out of battery or it is shut down. The only things accessible are
the BIOS menu, System Recovery, Boot Device Options, System Diagnostics, and System information.

I currently own a HP Envy 4 Notebook PC. The most recent change was updating to Windows 10 from Windows 7 and that was about 2 weeks ago. And the hardware has never been altered.

Known Specs (sorry, I don't know much about the specs)

OS: Windows 10

Processor:Intel(R) Core(TM) i5-3317u

CPU: 1.70GHz

Attempted Solutions:

• Attempted to enter into Windows Advanced options with F11 Key, This somehow set me back into Windows 7 and gave a BSOD with no second line of text stating the problem. The STOP code is as follows.

(STOP:0x0000007E(0xFFFFFFFFC0000005,0xFFFFF8800168C9C8,0xFFFFF8800415B798,0xFFFFF8800415AFF0) iaStor.sys - Address FFFFF8800168C9C8 base at FFFFF88001653000, DateStamp4ed5a567)

Only way to exit BSOD is by turning power off

• Attempted to update BIOS with no succsess, problem stayed the exact same.
• Attempted all HP Advanced System Diagnostic tests including Start-Up Test,Run In Test, System Tune-Up, Hard Disk Test, Memory Test. All of them were passed and the problem remained the same.

Thanks For Helping!

Sincerely