Windows 10: Constantly getting BSODs

Hello, I bought a new MOBO, CPU and RAM about a month ago. I put all of that into my computer, checked everything twice, and then started it. But there was a problem, I didn't know that I need to reinstall Windows when I change my MOBO, so I did that. I went with the Windows 10 Pro version, but without a key. About 7 days after that, I started getting BSODs. I was trying to figure out what was happening, and everytime I somehow managed to start my Windows againsometimes just restarting the computer, sometimes plugging and unplugging the cables, sometimes system restore, sometimes chkdsk. Anyway, the BSOD's that I've been getting are mostly Critical Process Died and Unexpected store exception. And, every time I fixed it, about 7 days later, it would start giving me BSOD's again. So I thought maybe it's something to do with the windows activation, because I chose the Pro one without the key. Right now, I am using my old computer because I don't really want to waste any more time trying to figure out the problem on my own. So I am asking you.

Also, sometimes when I tried booting into Safe Mode, I would get BSOD even in Safe Mode. Viruses definetely are not the problem, because I reinstalled Windows a week ago, and I am getting BSODs again. And also, everytime I got the BSOD, I heard some weird click in my computer's case.

Please help me, thanks.

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

Getting BSOD constantly! -_- [Solved]

Hi Syed,

BSOD can be caused by bad drivers, failing RAM, overheating or updating your the BIOS can also be one of the reason. You may boot the computer in safe mode and see if you would still get the BSOD on your computer. If the issue still persists, we suggest you
contact your manufacturer to resolve BSOD and BIOS issue.

Regards.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.